Alto TS215 15-Inch Powered Speakers with Covers

The new Truesonic TS2 product range is the result of a clean-sheet approach to designing professional speakers that strike an ideal balance between no-compromise acoustic performance, the complete array of features that users demand and outstanding ergonomics and utility - all coupled with a stunning new industrial design. The TS2 family builds upon the amazing success and wide acceptance of the current TS1 series. The current Truesonics established a benchmark for clarity, high output, flexible I/O options and value that has made them the worldwide standard of comparison.

The amplifiers in all three are rated at 550 watts continuous, 1100 watts peak - a significant increase over the previous line. This new higher power capability ensures greater output for use in larger spaces, with increased clarity, since the amplifiers won't "run out of steam" and distort the way less powerful units will. The TS215 has five integrated handles, making it easy to pick up in either H or V orientation. Each model also employs professional-grade M10 rigging/suspension points. The tough, durable cabinets have excellent acoustic properties, while their light weight makes them easy to transport. Higher performance, unsurpassed utility and flexible I/O options, easy transportability and unparalleled value - you'll find it all in the Alto Professional TS2 Series.

Defend your Truesonic TS215 against the inevitable bumps, scratches and dents that come from constant transport. This durable, padded speaker cover is tailored specifically for the TS215. It slips on easily and thanks to the bottom strap, stays in place regardless of orientation, making it ready to endure the tortures of travel. Top and side cutouts give you easy access to the speaker's handles, so it's not only protected, but also easy to carry.

• 550W continuous, 1100W peak Class D power
• 15" (381mm) LF driver, 2.5" (63.5mm) high-temperature voice coil
• 1" (25.4mm) neodymium HF driver with precision waveguide
• Bi-amplified design with precision active crossover and EQ
• Integrated 2-channel mixer with dual XLR 1/4" combo mic/line inputs and independent level controls
• XLR link output
• Ground-lift switch
• Contour switch for increased EQ control
• Electronic clip, thermal and transducer overdrive protection
• Compact, lightweight, trapezoidal cabinet design for easy transport and installation
• Angled rear panel for wedge monitor applications
• Stand and pole-mountable with integral M10 suspension points
• Designed and tuned in the USA
• Output power: 1100W peak (700 LF + 400 HF) 550W continuous RMS (350 LF + 200 HF)
• Low frequency: 15" (380mm) woofer, 2" (51mm) voice coil
• High frequency: 1" (25mm) neodymium driver with precision waveguide
• Crossover: 2 kHz
• Maximum SPL: 130 dB peak, 127 dB continuous (dB-SPL @ 1 m)
• Frequency response: 50 - 20 kHz (+/- 3 dB)
• Frequency range: 43 Hz - 22 kHz (-10 dB)
• Coverage: 90° H x 60° V nominal
• Connectors: (2) XLR + 1/4" combo jack mic/line inputs, (1) XLR mix output
• Cabinet: trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
• Controls: volume, power on/off with LED, clip limiter with LED, ground lift
• Protection: electronic clip, thermal and transducer overdrive protection
• Power: AC input: 100-120/220-240V, 50/60Hz
• Dimensions: 15.6" x 14.1" x 25.7" / 396mm x 357mm x 652mm (W x D x H)
• Weight: 32.7 lbs. / 14.9 kg

• Added cover protects the TS215 during transport
• Durable nylon construction, made to withstand constant use
• Easy slip on design - cover and uncover in seconds
• Bottom strap keeps the cover in place when transported horizontally
• Top and side openings for easy access to TS215's handles