American DJ PRO 38 B LED RC 12x1W RGB DMX Par

The ADJ PRO38B RC is high output black Par Can with twelve 1-Watt LEDs that is ideal for lighting up stages, dance floors and entertainment venues. The fixture’s RGB color mixing allows users to get a full spectrum of color from one Par Can. The PRO38B RC features an Infrared wireless remote to control what would normally require a DMX controller or adjustments made by hand on the rear panel. Aim the wireless remote at the unit and control features such as: Black Out, built-in programs, flash, DMX addressing and RGB color change.

This fixture uses LEDs rated at 50,000 hours with a maximum power draw of 15W. DMX addressing may also be changed by the unit’s 3-button LED display. The PRO38B RC has a dual hanging bracket that makes it easy to set on the floor.

• Black Ultra bright Par 38 with 12x 1-Watt LEDs (4 Red, 4 Green, and 4 Blue LEDs)
• Great for performance stages where traditional par cans emit a lot of heat onto performers
• Includes wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC)
• 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes
• 6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
• Smooth RGB color mixing (fast or slow color change operation)
• Flicker-free operation for film and television
• 32 built-in Color Macros
• Color strobe effect
• Electronic Dimming: 0 - 100%
• Beam angle: 30-degree
• Linkable via 3-pin XLR cable (In/Out)
• 3-button LED display on rear panel
• Dual bracket system allows fixture to be hung or set on the ground
• Power Draw: 15W max
• ETL and ETLC Approved
• Run all night – No duty cycle
• Long Life LEDs (50,000 hrs.)
• Multi-voltage: 120-240V, 50/60Hz
• Dimensions (LxWxH): 7.25” x 7.25” x 9.5”
• Weight: 4 lbs.

• Black Out: Turns fixture On/Off
• Auto Run: Automatically run through built-in programs
• Program Selection: Access units built-in programs
• Flash: Strobe effect
• Speed: Control speed of Auto Run
• DMX Mode Select
• Sound Active: Activates sound active mode
• Slave: Designates the fixture as a “slave” fixture in the Master/Slave configuration
• Set Address: Set DMX Address on a fixture
• RGB Buttons: Adjust RGB colors with the “+” and “-“ buttons
• + and – Buttons: Adjust flash rate, speed of the Auto Run and Program Selection