BASSBOSS AT212 Dual 12-Inch Powered Speaker
The AT212 Attuned Top is a 2-way, self-powered, bi-amplified loudspeaker for short to medium distance coverage. It’s a simple to use, easy to set up, attractive, compact, light weight trapezoidal top cabinet capable of high output while maintaining a smooth sound and natural musical character.
A 1500W EIAJ Powersoft class D module provides amplification. An integrated DSP provides a comprehensive set of functions including a high-pass filer, crossover filters, limiting, equalization and time-alignment. Four presets allow tailoring the sound to suit the application from a near-field indoor setting through to an outdoor, long-throw setting. An input gain control allows adjustment from +12dB through -12dB and off. The amplifier features a global power supply that can operate on voltages from 90 to 250V using only 3.6A at 120V and 2.2A at 240V.
Exceptionally high-quality drivers, featuring dual direct-radiating 12” high-efficiency neodymium magnet woofers and a 1.4” exit compression driver that is loaded on an 80 by 60 degree horn. With the cabinet standing vertically, the horn has a horizontal coverage of 80 degrees. The horn is rotatable for situations where the cabinet is flown horizontally, ideal for low-profile placement on a ceiling, above a dance floor or as a near-field fill.
Dual 12” low frequency drivers were chosen to minimize the cabinet frontal area while delivering the best possible speed and impact in the mid-bass and midrange frequencies. The 4-foot tall box elevates the high frequency section to a minimum of 7’5” on center when stacked on the matching subwoofer systems, such as the SSP218, SSP215, or pairs of the SSP118.
For the Mobile Professional: At only 79 lbs it is particularly well suited to applications where light weight is required. One-person set-up of a substantial system is not only possible; it’s realistic. The AT212 transports on top of the SSP218 subwoofers when they are on their wheel carts, making load-in and set-up of systems incredibly fast and easy.
A very effective, practical, high fidelity 3-way active loudspeaker system when combined with BASSBOSS powered subwoofers. In most venues it’s possible to roll the system into place, lock the casters, tilt up the tops, plug in the power and signal and be ready to play in a few short minutes. The supreme simplicity and ease with which these components work together will delight anyone who is regularly moving gear.
Their high fidelity, abundant power, easy setup and rock-solid reliability make them extremely versatile. Whether you use them for club installations, rentals, productions, band gigs or mobile DJ gigs, you want something that’s easy to load in and difficult to mess up. It’s great to have a system that one person can set up and take down in a very short time, one that uses minimal electricity, has built-in limiting and protection and seriously rocks a crowd.
Weatherized version available for outdoor installations features rack-mounted amplification and waterproof input connections along with a fiberglass underlayed finish, silicone sealed gaskets, stainless steel grill and hardware and a hydrophobic grill cloth.
Frequency response (+-3 dB): 100 Hz - 18 kHz
Maximum sustained output: 128 dB
Short-term peak output: 134 dB
Nominal Dispersion (°H x °V): 80 x 60, rotatable to 60 x 80
Amplification: 1500-Watt two channel powersoft class D
Processing comprehensive including high-pass, low-pass, parametric EQ, phase alignment and limiting.
Electrical connectors: Neutrik PowerCON in and through
Voltage operating range: 90-250V. Auto-sensing, auto switching universal supply
Current draw, nominal: 3.6A @120V, 2.2A @240V
Signal input connector: XLR-F
Signal output connector: xlR-M pass-through only
Enclosure type: 2-way mid-high. direct radiating vented LF section, horn-loaded HF section
Transducers LF: 2 x 12" diameter (300 mm) neodymium motor woofer with 3" (76 mm) voice coils, waterproof cones
Transducer HF: 1 x 1.4" exit, 3" (76 mm) diameter voice coil compression driver mounted to an 80° by 60° constant directivity horn
Cabinet construction: 15mm baltic birch plywood, 18mm baffle, dado joinery, 4 steel bar handles, 15° side angle trapezoid
Exterior finish touring: weatherproof bonded high-pressure polyurethane
Exterior finish installation: textured epoxy paint
Exterior finish weatherized fiberglass underlayed UV treated bonded high-pressure polyurethane with silicone seals and stainless steel grill
Grill: black perforated, powder-coated steel
Dimensions: 47.75" x 14.3" x 17.75" (HxWxD)
Weight: 79 lbs.
- High output, efficient
- 1500 W EIAJ Powersoft Class D amp
- Self-powered, self processing
- Light weight for easy set-up
- Flyable horizontally or vertically
- Wide coverage rotatable horn