(
For mobile and small permanent installations, the Intimidator Spot 250 is your best choice! This moving yoke fixture comes complete with a gas discharge lamp affording a large and extremely bright throw. A pan and tilt lock allows for safe transport from gig to gig. Customized effects are provided by the slot-n-lock gobos. These features and a wide variety of effects at an affordable price make this a favorite!
Features:
- 10 or 14-channel DMX-512 moving yoke
- Pan: 540° / tilt: 270°
- Color wheel
-7 interchangeable, slot-n-lock colors + white
-Split colors
-Rainbow color spin at variable speeds - Indexed rotating gobo wheel with gobo shake
-7 interchangeable, slot-n-lock gobos + open
-5 metal, 2 glass installed
-Rotating gobo wheel spin at variable speeds - 3-facet, high-speed rotating prism at variable speeds
- Variable motorized shutter (for strobing)
- Variable motorized focus
- Variable motorized dimmer (0 – 100%)
- Remote fixture reset, lamp on/off & vector speed channel
- Individual reset of pan/tilt, color, gobo, shutter, prism, focus
- Move-in-black for pan/tilt, color, gobo
- Built-in effect macros via DMX (gobo, gobo rotation, color, strobe, prism)
- Built-in automated programs via master/slave or DMX
- Built-in sound-active programs via master/slave or DMX
- Pan/tilt lock during transportation
- 3-pin and 5-pin DMX connections
- User-selectable pan/tilt ranges
-Pan: 540°, 360°, 180°
-Tilt: 270°, 180°, 90° - Automatic pan & tilt correction
- User-selectable basic or advanced operating modes
Specifications:
- Beam angle: 22°
- Lux: 18,000 @ 1m
- Light source: MSD250 250W 8000°K 2,000hrs
- Power and current: 120V, 60Hz: 403W, 3.6A operating, 5.8A inrush, PF 0.90
- AC power: Switchable 115V/230V 50/60Hz
- Weight: 58.6lbs (26.6kg)
- Size: 16.3in x 13.3in x 20.4in (414mm x 337mm x 517mm)
| Rotating Gobos (Number of): | 7 + open |
| Prism: | 3-facet |
| Dichroic Colors: | 7 + white, wheel 1 |
| Shutter: | Variable + random |
| Strobe Effect: | Yes |
| Focus: | Remote |
| Number Of LED's: | N/A |
| Individual LED Wattage: | N/A |
| Total Wattage: | 250 |
| Lux @ 100%: | 18,000 @ 1m |
| Lux Red: | TBD |
| Type: | Spot |
| Lux Green: | TBD |
| Lux Blue: | TBD |
| Lux White: | TBD |
| Lux Amber: | TBD |
| Beam Angle: | 22° |
| Field Angle: | N/A |
| Lens Option: | No |
| Flicker Free (Y/N): | Yes |
| DMX Channels: | 10,14 |
| DMX Pin Config (3 or 5 pin): | 3 |
| Dimming Curve: | No |
| Binning (Color Consistency): | N/A |
| Multi Color Chip (no shadows): | Yes |
| Color Temp Macro: | No |
| IP Rating (indoor / outdoor): | IP20 |
| Auto Sensing Power Supply: | No |
| Sound Activated: | Yes |
| Internal Programmable Memory: | No |
| Zoom: | No |
| Built-In Wireless DMX: | No |
| Power Draw: | 403 watts/3.6 amps |
| Power Linking (No or Edison or P: | No |
| Approval: | CE |
| Dimensions / Size: | 16.3 x 13.3 x 20.4 in |
| Net Weight: | 58.6 lbs |
Customers who have bought this product have also bought:
REVIEW SNAPSHOT®
by PowerReviews(based on 3 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
- Reviewer Profile:
- Experienced (3)
REVIEWS
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
- Bright
- Efficient
- Long Beam Throw
Cons
Best Uses
Comments about Chauvet Intimidator Spot 250 DMX Moving Yoke +:
For the price, these just can not be beat!
They are nice and bright, decent stock gobo and color selection. Weight is a bit on the heavy side and mounting brackets are decent as long as you are mounting off a truss using C-Clamps (those using odd size truss or clamps other than C-Clamps will have a little more difficulty in mounting)
I did run into a small quirk with the fixtures, they seem to internally stick on the wrong DMX setting, even after you address them. The solution was to run the address digits thru each number and hit enter a few times. This took us about 2 hours of trail and error to get to work. Once we had them set on the right address, so far (fingers crossed) no issues.
We've only had them installed in a club for 6 months now, have not had to do a maintenance call yet.
Only other drawback is not having a 2nd gobo wheel and zoom features, but then again for the price what you do get is outstanding. Perhaps a firmware update in the future would resolve the DMX address issue.
Pros
- Bright
- Easy Set Up
- Long Beam Throw
Cons
- Heavy
Best Uses
- Mobile DJ
- Performances
Comments about Chauvet Intimidator Spot 250 DMX Moving Yoke +:
I have 4 of these they look great, bright and you can run them master/slave awsome light show by themselves.
Pros
Cons
Best Uses
Comments about Chauvet Intimidator Spot 250 DMX Moving Yoke +:
These fixtures are decent. They are going on the front of our stage. They move quick and the gobos are cool. I like them slightly better than the Peral River Solo 250. Usually not a Chauvet fan, but this is a good buy. Same output as other 250 lights, not a Martin light, but a good light nonetheless.
Displaying reviews 1-3
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:
What case should I use for this bag?Asked on 11/2/2011 by a from spearfish, sd1 answer
A:
I recommend the Road Ready RR2MH250C 2X250 Type Moving Heads * (Item # 52943).Answered on 11/3/2011 by DJ Menergy from Cypress, CA
Q:
How do these mount??Asked on 5/15/2010 by Anonymous2 answers
CUSTOMER CARE
A:
The Chauvet Intimidator Spot 250 DMX Moving Yoke come with hanging brackets. Clamps sold seperatlyAnswered on 5/19/2010 by od from cypressA:
They come with a mounting bracket that bolts onto the fixture. This bracket, then has the holes in it that you will mount your clamps onto. Depending on how you mount these, this can be hard as the clearance to get your hands inside the mounting bracket to attach it to the fixture can be small. Using c-clamps and tour grade truss is best. Mounting directly to a ceiling or other as built structure (or cheap small truss) can be tricky.Answered on 7/11/2010 by Thelazer from Orlando, Fl
Q:
Which DMX controllers have ready to use Fixture code for the Intimidator Spot 250?Asked on 4/29/2010 by JOB of Westminster from Tallahassee, FL1 answer
CUSTOMER CARE
A:
Chauvet Intimidator Spot 250 DMX Moving Yoke can be used with any DMX controller.Answered on 4/30/2010 by Stephen from PSSL from Cypress, CA
Share the savings! Tell your friends and family about the great savings on this and thousands of quality products." Note: You and Your friend's email addresses are only used once as a referral. We will not collect or store the email addresses.
