(
The Power to Move You
Crown’s XTI-6000 amplifier defines the standard for portable PA systems with unmatched performance, technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTI-6000, you’re choosing one of the most powerful and efficient amplifiers on the market today.
With innovations designed to simplify your life and rock their world. Innovations like integrated DSP that allows you to quickly and easily configure crossovers, EQ, limiting and delay, along with tools like a pink noise generator, subharmonic synthesizer, and universal tracking switch-mode power supply, which reduces power draw and waste heat. And as the first Crown amps to use Icepak™ thermal modeling software, the XTI series are at the top of their class when it comes to thermal efficiency and lightweight portability.
The XTI-6000 demands respect without making demands on you. With this kind of freedom and reliability, the XTi family is one you’ll always want to be a part of. XTi. The power to move you — and the world!
Output Power:
- 1200W/per ch @ 8 ohms
- 2100W/per ch @ 4 ohms
- 6000W bridged mono @ 4 ohms
Specifications:
- Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
- Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz): +0/–1 dB
- Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted: 103 dB
- Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
- Input Stage: Input is electronically balanced and employs precision 1% resistors.
- AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): XTi 6000: 15.3A; at idle draws no more than 180 watts.
- Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
- Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
- Load impedance - Stereo (note: safe with all types of loads): 2-8 ohms
- Load impedance - Bridge mono (note: safe with all types of loads): 4-16 ohms
- Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB.
- Maximum Input Signal: +22 dBu typical
- Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing)
- AC Line Voltage & Frequency Configurations Available (± 10%): 100V, 120V, 220-240V 50/60 Hz
- Ventilation: Flow-through ventilation from front to back
- Cooling: Heat sinks and proportional-speed fan
- Dimensions: Width, Height, Depth (behind mounting surface): 19"W x 3.5"H x 16.2"D
- Weight: 24.0 lbs
Customers who have bought this product have also bought:
REVIEW SNAPSHOT®
by PowerReviews(based on 2 reviews)
Ratings Distribution
Reviewed by 2 customers
Sort by
Displaying reviews 1-2
Pros
- Easy To Setup
- Energy Efficient
- Good Power Output
- Great sound clarity
- Great Sound Quality
Cons
Best Uses
- DJ / Mixing
- Larger Rooms
Comments about Crown XTI-6000 Power Amp 2100 Watts At 4ohm Stereo:
powerful output with great sound clarity
could use a longer power cord
- Was this a gift?:
- No
Pros
- Accurate Controls
- Easy Setup
- Energy Efficient
- Good Power Output
- Great Sound Quality
Cons
Best Uses
- DJ / Mixing
Comments about Crown XTI-6000 Power Amp 2100 Watts At 4ohm Stereo:
I run 4 JBL SRX-718S subs with this thing. They don't break a sweat, nor does the 6000. Great amp (especially for the weight and price!). I'd buy another if I needed to grow my system
- Was this a gift?:
- No
Displaying reviews 1-2
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:
Do I need a crossover to run two crown xti4002 power amps at
the same time?Asked on 5/25/2011 by Anonymous1 answer
CUSTOMER CARE
A:
You do not need a crossover since the Crown XTI-4002 has it built-in.Answered on 5/27/2011 by DJ Seankillazz from Cypress, CA
Share the savings! Tell your friends and family about the great savings on this and thousands of quality products." Note: You and Your friend's email addresses are only used once as a referral. We will not collect or store the email addresses.
