Doug Fleenor RERUN-A 10-Show Playback Wall Plate Remote

Doug Fleenor Remote 10 Show Playback (Rerun A)

The Rerun Architectural is a lighting control station capable of storing up to ten 40-minute shows. Shows are recorded by capturing the output of a DMX512 console. The recorded show start and end points may be trimmed non-destructively. Each show can be set to hold the last look, loop to itself or link to another show. Shows are started by pressing one of the ten show buttons.

The basic system consists of a Rerun Architectural station and a power supply. The solid aluminum faceplate is designed to install over a standard two gang electrical box. Single gang remote stations can be added to remotely select shows. Connections to the Rerun Architectural are power (2 wires), DMX512 Input (3 wires) and DMX512 Output (3 wires). Power for the Rerun Architectural can be supplied from a variety of sources, including a 10V class 2 "doorbell" transformer.

Features:

• Terminal block #1: Phoenix contact MSTB series, 5 position two part terminal block
• Terminal block #2: Phoenix contact MSTB series, 3 position two part terminal block
• Input circuit: ESD protected EIA-485 transceiver (LT1785)
• Output circuit: ESD protected EIA-485 transceiver (LT1785)
• Isolation: DMX input is not isolated from DMX output
• Power input: 10 to 15 volts AV or DC / 150mA per station (A 10 volt class 2 "doorbell" transformer is recommended for fixed installations)
• Faceplate dimensions: 4.5" x 4.6" x 0.2" (HxWxD)
• Faceplate rear inset dimensions: 4.15" x 4.25" x 0.1" (HxWxD)
• Electrical box minimum inside dimensions: 2.9" x 3.5" x 1.5" (HxWxD)