Laserworld PRO-1600RGB 1600mW RGB Laser Effect
The Laserworld PRO-1600RGB is a white light RGB laser light system with a total output power of up to 1'600mW. It is not only equipped with fast scanners for great projections, it also comes with the super bright 637nm red, that is visible several times better than the 650nm plus has a thinner, more accurate beam profile. Therefore the Laserworld PRO-1600RGB ensures great visibility and is suitable for beam as well as for graphics projections.
This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld PRO-1600RGB ideal for all applications requiring many different color hues and color fadings.
The very advantage of the projectors of the Proline Series is the integrated Glass Effects Actuator: The systems not only run in normal scanner mode. Similar to an optical bench they are equipped with additional grating effects. Without the effects it is possible to show emotionalizing beam shows as well as graphics projections.
An IR remote controller, included in the delivery, allows different settings like modes selection, speed control, run specific patterns etc. The IR LED at the front side flashes when receiving commands by the controller. The IR control is ideal when the projector is mounted on a truss etc. difficult to reach.
The rugged housing of the Laserworld PRO-1600RGB is very compact and has dimensions of only 9.25 x 8.10 x 6.5 in (W/B/H). A special feature of the housing is the mounting bracket that allows to fasten the unit in about 360° turns around the mounting axis of the bracket. This feature makes a fixed installation very easy.
The Laserworld PRO-1600RGB is equipped with red and blue diode laser modules and a green DPSS laser module. The red diode has a wavelength of 637nm for very good visibility at great beam specifications. Together with the green DPSS laser module with a wavelength of 532nm and the royal-blue diode laser module with a wavelength of 445nm the laser sources create brilliant colors and form a powerful source for the Laserworld PRO-1600RGB.
The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of about 1.3mrad (full angle). At the same time it offers a galvo system with up to 40kpps with a max. scan angle of 40° and a deflection angle for the grating effects of up to 80°.
The Laserworld PRO-1600RGB is a powerful white light laser system. This device is well suited for private use and professional applications and it is ideal for use in medium to large clubs, discos and nightclubs or in other party locations. It is also a great solution for mobile DJs and rental companies.
FDA laser variance application kit included In box with laser. Completion of Laser Variance Application Required Prior to Operating Laser.
- Total Power typical: 1'600mW
- Minimum output power: 1'300mW
- Power Red: 300mW / 637nm
- Power Green: 300mW / 532nm
- Power Blue: 700mW / 445nm
- Beam Specifications (full angle): ca. 3mm / ca. 1.3mrad
- Laser Sources: Diode, DPSS Laser
- Laser Class: 4
- Operation Modes: auto, music, DMX, ILDA, SD Card
- Scanner: Galvo system, up to 40kpps @4
- Scan Angle max.: 40° max. / 80° for glass effects
- Basic Patterns: >200 Patterns (layers, tunnels, fences, waves etc.; grating & 3D effects)
- Accessories: power cable, remote control unit, SD Card, manual, ILDA Interlock Connector, 2 x keys (for key switch), Safety Unit pro
- Power Supply: 110V - 220V AC 50/60Hz
- Power Consumption: 80 W
- Dimensions: 9.25/8.1/6.5 in
- Weight: 10.5 lbs