Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

For the price and efficiency, I put an o-clamp on every fixture and leave the clamp on. I do not remove them after each event.
On occasion, the clamp may be too small; the inner plastic material can be removed allowing for more than the 1.5" it was intended for.
For posts or truss which are too small, I have strips of rubber matting (cut into small strips) to wrap around the posts as filler material.

These clamps are great, but they do wear over lots of use and outdoor use. Particularly, the tightening screws tend to freeze after long storage or the plastic just wears down due to use.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

So much better than the C-Clamps. Doesn't scratch or mar your light truss...

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

I had the C-Clamps before. I replaced all of them once I learned that they scratched up my Truss System. Do yourself a favor and learn from my mistake; make the 1 time purchase rather than buying essentially the same thing twice. There is a sense of confidence as well with respect to my fixtures not moving or slipping on my Truss.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

quick and easy

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

Things that are great product

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

I liked these so much, I got a bunch!

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

This is a great product. I use the on all my lighting fictures.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

I purchased a handful of these for my lighting gear. Wing nuts and bolts were slowing me down putting my lighting up and down. Or I'd get lazy and try to be careful while leaving the lights bolted to the truss.

These have cut down my set up time by 20 min! I don't have to be as concerned how the truss is loaded in the van, etc.

They also will hold the position you set them in. I have 2 moonflowers that are pretty old. (ie heavy) and they held them in the position I put them all night.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

Great for hanging lights.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

Super easy, very durable. Didn't worry for a second while using to hang.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

Works well. Seems pretty strong.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

I will only use these O Rings to hang my lights on the truss. Just love them.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

sweet Little secret for hanging your lights on Truss.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

I put these clamps on my truss, they fit perfectly and the only reason I bought more is when I added more lights. More items should have long lasting quality as these babies.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

I leave my O-Clamps on my cross truss. When i set up for my next gig i can put my light in the same spot every time. No guess work and these clamp will no scratch tour truss system. With other clamps i have to respray my truss 2 to 3 time per year!

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

Easy to use,holds tight

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

These clamps make setting up your lights easy and quickly. It also stops damage to your stands from the screw type clamps. I added them to all my lights.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

This is exactly what i needed. Super easy to install. Super easy to add my big lights and take them off at the end of a gig.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

I use this o-clamp to hang & install lights &
sirens to trusses when I'm doing my gigs, it's one of the best clamps you can get.

Comments about Eliminator O-Clamp Lighting Truss Clamp - 1-1/2 Inch:

They work great for any light. I like the adjustability for 1 to 1 1/2.. Never a problem with them