Odyssey LTMVSS1014 Pro Dj Video Screen Package + (Item # Discontinued)

Comments about Odyssey LTMVSS1014 Pro Dj Video Screen Package +:

We use this product to show slide presentations and videos at weddings and various parties. Works great and is nice for the price. Works well with reverse projection as well.

Comments about Odyssey LTMVSS1014 Pro Dj Video Screen Package +:

DJ/KJ/VJ 25 years. This is an unbelievable deal on a great screen. Perfect for mobile video or home movie nights.It arrives in a large heavy box but don't be intimidated. No directions, just a diagram. The pole with the holes goes across the top so you can adjust the width and the 2 knobs go through the holes to hold it apart. It all fits into the carrying bag and has an outside pocket for the screen. It will take two people to raise the screen up. The adjustments that require a screwdriver can be set in place and tightened once so all you will need later is the allen wrench. Screen material seems great but I have not projected on it yet.Adjust the screen straps almost all the way out except the top one, make it pretty tight so it pulls up. Attach the sctraps to the screen loops.There is a label on the bottom side of the screen that I use to mark the bottom of the screen.Outside, set up each side of the frame with the brace bars on then slide the middle bar between the two and align the first holes if you want maximum width. Attach the knobs with wingnuts through the holes to hold it apart. Tighten all other fittings with allen wrench.Attach the screen top starting with the top middle, then the top corners. With two people, raise the first pole section about 3' and tighten. Raise the second section to reveal the 3rd hole and put the pin through the hole and lower it so it rests on the pin and tighten the knob.Attach the side screen straps under the knobs and the bottom ones under the lowest knobs. You can adjust the height and width for your application. You may want to hang a weight on the bottom middle loop to pull the screen down.If outside place a bag of gravel on each stand to hold it. It should be fine unless its very windy. If damp, allow the screen to dry before packing it away so it won't mold.Setup/Breakdown time: 15 minutes(after the 1st time).Projection area maximum: 53" x 92".Projector distance 11' from screen (Epson 77c).Projection: Front or rear.Pros: Easy to transport and setup.Front/Rear projection. Inexpensive. Ability to raise up high above the crowd.Cons: Using allen wrench. I would rather have small knobs to turn. I will buy a wrench with a handle on it.Overall: WOW I LOVE IT! It is perfect for my needs since I can raise it up and rear project on it. I do mobile videos and karaoke and will use this in gymns and large rooms. A great buy![@]