(
This Product Has Been Discontinued.
SC System 3 controller package
The SC System 3 consists of two decks (SCS.3ds) and a mixer (SCS.3m) that have many of the same controls as a traditional two turntable and mixer setup, however they are way more powerful and advanced. At a fraction of the size and weight of a traditional setup and with minimal moving parts, the SC System 3 is a great solution no matter if you are a seasoned veteran or a beginner DJ. Native Instrument’s Traktor LE software perfectly integrates with the SC System 3. The SCS.3 controllers not only allow you to mix between two songs, but also allow you to manage your music collection, loop, add effects, and engage Traktor LE's synchronization engine to help automatically line up two songs without the years of practice required on a traditional vinyl setup.
Because of the tight interaction between the SCS.3 controllers and Traktor LE, everything that happens on screen stays in perfect harmony with the light feedback on the controllers, allowing you to mix in low light environments and focus on your performance with confidence.
The SC System 3
The SCS.3 controllers can all be used separately, or together to give you an unparalleled MIDI control rig that allows you to plug and play anywhere in the world within minutes. With a built-in powered USB hub and magnetic connecting system, the SC System 3 controllers can be easily connected to each other for a high tech version of a full traditional DJ setup... without the weight, size and connectivity issues.
4 Deck Control - The SCS.3m features two channel strips for control of two channels of a software mixer at any one time. However, each channel strip can be switched to control an additional two channels for a total of four channels of control with the 3m, providing a scalable interface while remaining portable at the same time. When switching between decks the 3m will remember which control mode each deck was on (FX or EQ) and will automatically update the sliders to that channel's last settings.
See Me, Feel Me - The SCS.3d’s layout and portability provide DJs with an unmatched level of performance and control. The StanTouch® interface can be used for scratching, scrubbing, and navigating through digital audio. The tactile buttons, triggers, and virtual faders can also control samples, pitch, effects, cue and loop points, and other mapable functions. Multiple finger touches can even prompt quick kills on EQ's or transform effects on volume.
USB Hub - The built in powered 4-port USB hub can be used to connect additional SCS.3 products to the SCS.3m allowing a single USB cable to be connected to the computer. With 2 ports on the rear of the unit it's possible to connect devices very quickly for fast setups in mobile environments. 2 additional ports on the inside of the back panel of the SCS.3m allow cables to be routed from additional 3 series controllers or storage devices such as flash drives. With a power connection the USB hub ensures that devices receive enough power for complete stability in any performance environment.
Traktor - Every SC System 3 pack comes with the ability to unlock the LE version of Native Instruments' award winning Traktor PRO software. One of the first true Traktor LE controllers, the SC System 3 pack is specifically designed to incorporate full application feedback from Traktor, ensuring complete parity between hardware and software. iTunes® integration, broad file compatibility, and an advanced tempo detection / synchronization engine enables you to easily browse your music collection, load a song, sync the decks for an automatic perfect beat match, and start mixing in no time, even without any DJ experience. For the more accomplished DJ, Traktor LE also opens the door to advanced performance techniques such as dropping FX and looping for live remixing.
Hook Me Up - Magnect connection system allows multiple SC System 3 units to securely snap together, creating a larger control surface with increased performance options. And built in wire management means that there won’t be a mess of cables to deal with.
Techincal Specifications
USB Specifications USB 1.1 and 2.0 class compliant MIDI controller USB bus-powered*
Power Specifications 12V DC / 1500mA
System Requirements: Mac: Power PC G5 or multicore Intel® processor Mac OS X (v10.4 or later)
Windows: PC running Windows XP or Vista >
The SC System 3 consists of two decks (SCS.3ds) and a mixer (SCS.3m) that have many of the same controls as a traditional two turntable and mixer setup, however they are way more powerful and advanced. At a fraction of the size and weight of a traditional setup and with minimal moving parts, the SC System 3 is a great solution no matter if you are a seasoned veteran or a beginner DJ. Native Instrument’s Traktor LE software perfectly integrates with the SC System 3. The SCS.3 controllers not only allow you to mix between two songs, but also allow you to manage your music collection, loop, add effects, and engage Traktor LE's synchronization engine to help automatically line up two songs without the years of practice required on a traditional vinyl setup.
Because of the tight interaction between the SCS.3 controllers and Traktor LE, everything that happens on screen stays in perfect harmony with the light feedback on the controllers, allowing you to mix in low light environments and focus on your performance with confidence.
The SC System 3
The SCS.3 controllers can all be used separately, or together to give you an unparalleled MIDI control rig that allows you to plug and play anywhere in the world within minutes. With a built-in powered USB hub and magnetic connecting system, the SC System 3 controllers can be easily connected to each other for a high tech version of a full traditional DJ setup... without the weight, size and connectivity issues.
4 Deck Control - The SCS.3m features two channel strips for control of two channels of a software mixer at any one time. However, each channel strip can be switched to control an additional two channels for a total of four channels of control with the 3m, providing a scalable interface while remaining portable at the same time. When switching between decks the 3m will remember which control mode each deck was on (FX or EQ) and will automatically update the sliders to that channel's last settings.
See Me, Feel Me - The SCS.3d’s layout and portability provide DJs with an unmatched level of performance and control. The StanTouch® interface can be used for scratching, scrubbing, and navigating through digital audio. The tactile buttons, triggers, and virtual faders can also control samples, pitch, effects, cue and loop points, and other mapable functions. Multiple finger touches can even prompt quick kills on EQ's or transform effects on volume.
USB Hub - The built in powered 4-port USB hub can be used to connect additional SCS.3 products to the SCS.3m allowing a single USB cable to be connected to the computer. With 2 ports on the rear of the unit it's possible to connect devices very quickly for fast setups in mobile environments. 2 additional ports on the inside of the back panel of the SCS.3m allow cables to be routed from additional 3 series controllers or storage devices such as flash drives. With a power connection the USB hub ensures that devices receive enough power for complete stability in any performance environment.
Traktor - Every SC System 3 pack comes with the ability to unlock the LE version of Native Instruments' award winning Traktor PRO software. One of the first true Traktor LE controllers, the SC System 3 pack is specifically designed to incorporate full application feedback from Traktor, ensuring complete parity between hardware and software. iTunes® integration, broad file compatibility, and an advanced tempo detection / synchronization engine enables you to easily browse your music collection, load a song, sync the decks for an automatic perfect beat match, and start mixing in no time, even without any DJ experience. For the more accomplished DJ, Traktor LE also opens the door to advanced performance techniques such as dropping FX and looping for live remixing.
Hook Me Up - Magnect connection system allows multiple SC System 3 units to securely snap together, creating a larger control surface with increased performance options. And built in wire management means that there won’t be a mess of cables to deal with.
Techincal Specifications
USB Specifications USB 1.1 and 2.0 class compliant MIDI controller USB bus-powered*
Power Specifications 12V DC / 1500mA
System Requirements: Mac: Power PC G5 or multicore Intel® processor Mac OS X (v10.4 or later)
Windows: PC running Windows XP or Vista >
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
1 Question | 1 Answer
Q:
does it work with windows 7?Asked on 10/16/2011 by Anonymous1 answer
A:
It works with WIndows 7 as long as you update to the latest drivers from Stanton's website.Answered on 10/17/2011 by Donovan from Cypress
Share the savings! Tell your friends and family about the great savings on this and thousands of quality products." Note: You and Your friend's email addresses are only used once as a referral. We will not collect or store the email addresses.
