Korg MS20MSQ1 Ms20 Module Sq1 Combo

The classic MS-20 analog synthesizer that appeared in 1978 has been reborn as a perfect reproduction of the original circuit, first in 2013 as the mini-sized MS-20 mini, and now in 2014 as the MS-20 Kit that you can assemble yourself. The MS-20 Mini and the Kit were designed by the engineers who developed the original MS-20. At its introduction, the designers of the MS-20 wanted to create an interesting product quickly; the result was an enormous hit, but the designers felt there were actually a few things left undone. Now, after 37 years, the user-assembled MS-20M Kit has been completed. The MS-20M Kit is based on the MS-20 with additional improvements; it's an analog synthesizer module where you can choose your preferences and assemble yourself. In addition to greatly enhanced synthesis possibilities provided by oscillator sync, FM, two filters (pre and post), and PWM, there are jacks such as a CV IN that supports both Hz/V and V/Oct, making it play nicely with other equipment. You'll be able to immerse yourself in synthesis, and with the inclusion of the SQ-1 step sequencer you can also create and play sequences.

• Carrying on the distinctive synthesis of the MS-20, the MS-20M features additional improvements in both looks and functionality. Extending to detailed aspects of the design, the sound-creating possibilities have been dramatically boosted, making this sound module even more attractive and raising it to an even higher state of completion.
• SYNC ON/OFF switch allows oscillator sync
• Oscillator sync forcibly synchronizes the phase of VCO1 to the phase of VCO2, producing a powerful sound with complex overtones.
• FM ON/OFF switch allows frequency modulation
• The VCO1 waveform can be used to frequency-modulate the VCO2 waveform (FM or cross modulation), creating vibrato effects or extreme metallic sounds
• FILTER TYPE switch lets you select two types of filter
• The original MS-20 used two different VCF circuits depending on the date of production, and now you can choose either of these with a single switch. The earlier model (REV.1) has an aggressive character with distinctive distortion and self-oscillation, while the later model (REV.2) has minimal noise and a sweet, mellow sound.
• PWM IN jack allows pulse width modulation
• The PWM provided on the MS-10 of the past is now possible on the MS-20. By cyclically modulating the pulse width of the VCO1 square wave, you can obtain a distinctively fat sound.
• EG2 NORMAL OUT jack expands your sound-creating potential
• In addition to the previous EG2 REV OUT, we've provided a normal EG2 OUT that varies in the range of 0V--+5V.
• TRIG SW button lets you conveniently audition the sound
• Even on this keyboardless unit, the trigger switch lets you smoothly audition the sound while you edit the parameters.
• All CV/GATE specifications are supported: Hz/V and V/Oct, S-Trig and V-Trig
• From the time when it was originally produced, the CV standard used by the MS-20 was not the commonly used V/Oct standard, but rather the Hz/V standard that provided superior pitch stability. However, like the MS-50 of that time, the MS-20M Kit provides CV IN jacks for both the Hz/V standard and the V/Oct standard.
• For the TRIG IN jack that receives gate signals, jacks are provided not only for the S-Trig standard as on the original MS-20, but also for the widely used V-Trig standard. The MS-20M Kit supports any sequencer or controller that's equipped with CV/GATE output.

• Three sets of the junction jacks once provided by the MS-50 are also provided. Output signals from the SQ-1 step sequencer or similar device can be converted from a mini-phone plug to a 1/4" phone plug, or those signals can be distributed to multiple destinations for a variety of possibilities.

• There's a MIDI IN connector that can receive note messages, and a USB-MIDI connector that can transmit and receive note messages. You can perform using a taktile or other MIDI keyboard, or perform sequences that you've recorded on your DAW.

• The full-sized body supports 1/4" plugs and projects an aura of solidity. The side panels are luxurious wood, giving this unit some serious presence on your desk. The MS-20M is a user-assembled kit. There is no need for any tricky soldering or knowledge of electronic circuits. Just by installing screws and fitting parts together, you'll get your very own analog sound.

• Top panel, Bottom panel, Left side pane, Right side panel, Spacer sheet, Junction circuit board (small), Junction circuit board (large), Rear jack circuit board unit, VR circuit board (small), VR circuit board (large), Panel jack circuit board & switch VR circuit board, TRIG SW button, Nut A (x92), Washer A (x46), Nut B (x7), Nut C (x30), knurled nut (x3), Screw A (x4), Screw B (14), Spacer, Rubber bushing (x14), Rubber feet (x4), Knob (large) (x7), Knob (small) (x29), Cord hook, Box-end wrench (included), Mini-wrench (included)
• Connectors: Signal IN jack (1/4" phone jack), Signal OUT jack (1/4" phone jack, 2Vp-p output impedance 3.5kΩ), PHONES jack (1/4" Stereo phone jack, 33Ω 48mW), DC12V jack, MIDI IN, USB type
• Power Supply: DC12V
• Dimensions (W) x (D) x (H): 587 mm x 215 mm x 104 mm /23.11" x 8.47" x 4.09"
• Weight: 4 kg / 8.82 lbs.

• Voltage Controlled Oscillator 1(VCO 1) :Scale (32', 16', 8', 4') (6 octaves, +cent, -cent), Wave form(Triangle, Sawtooth, PW-Square, White Noise) (4 modes), Pulse width adjust 1:1 ˜ 1:infinity
• Voltage Controlled Oscillator 2(VCO 2) :Scale (16', 8', 4', 2') (6 octaves, +cent, -cent) :Wave form(Sawtooth, Square, Pulse, Ring modulator) (4 modes) :Pitch(± 2 octave)
• VCO Master control : Master tune(± 100cent) :Portamento(max. 10sec) :Frequency modulation intensity by MG/T.EXT(-5V ˜ +5V) :Frequency modulation intensity by EG1/EXT(-5V ˜ 0V)
• VCO Mixer :VCO 1 Level :VCO 2 Level
• Sync :On/Off Slid SW(VCO1-->VCO2)
• FM :On/Off Slid SW(VCO1-->VCO2)
• Voltage Controlled High Pass Filter (VCF HPF) :Cutoff frequency(50Hz ˜ 15,000Hz) :Peak(flat ˜ self OSC) :Cutoff frequency modulation intensity by MG/T.EXT(-5V ˜ +5V) :Cutoff frequency modulation intensity by EG2/EXT(-5V ˜ +5V)
• Voltage Controlled Low Pass Filter (VCF LPF) :Cutoff frequency(50Hz ˜ 15,000Hz) :Peak(flat ˜ self OSC) :Cutoff frequency modulation intensity by MG/T.EXT(-5V ˜ +5V) :Cutoff frequency modulation intensity by EG2/EXT(-5V ˜ +5V)
• Filter Type :Select Slide SW(REV.1 / REV.2)
• Envelope Generator 1 :Delay time(10sec) :Attack time(10sec) :Release time(10sec)
• Envelope Generator 2 :Hold time(20sec) :Attack time(10sec) :Decay time(10sec) :Sustain level(0V ˜ 5V) :Release time(10sec)
• Modulation Generator (LFO) :Wave form(Negative Sawtooth ˜ Triangle ˜ Positive Sawtooth, Wide Pulse ˜ Square ˜ Narrow Pulse) :Frequency(0.1Hz ˜ 20Hz)
• Power switch and Volume :Volume
• Indicator :LED(Power On, EG1+EG2 trigger, Modulation Generator rate)

• Control section :Input signal level :Low cut frequency(50Hz ˜ 2,500Hz) :High cut frequency(100Hz ˜ 5,000Hz) :CV adjust :Threshold level
• Input and Output :Signal In :Amplifier Out :Band pass filter Out :CV Out(0 ˜ +8.4V) :ENV Out(0 ˜ +5V) :Trig Out(+5V-->GND)
• Indicator(LED) :Peak indicator :Trigger indicator

• CV IN(Hz/V) :VCO 1 + VCO 2 control voltage input(Hz/V 0 ˜ +8V)
• CV IN(V/Oct) :VCO 1 + VCO 2 control voltage input(V/Oct 0 ˜ +5V)
• CV OUT :VCO control voltage output(Hz/V) (0 ˜ +8V Caution: only MIDI IN)
• TRIG OUT :Trigger output(+5V-->GND Caution: only MIDI IN)
• VCO :VCO 1 + VCO 2 external frequency control input(V/Oct -5V ˜ +5V)
• PWM IN :PWM for VCO 1 PW-Square
• VCF :External signal input(3Vp-p max.) :External High pass filter cutoff frequency control input(2OCT/V)(-5V ˜ +5V) :External Low pass filter cutoff frequency control input(2OCT/V)(-5V ˜ +5V)
• VCO + VCF :Total external modulation input(T.EXT)(-5V ˜ +5V)
• VCA :External initial gain control input(0 ˜ +5V)
• EG :EG 1 envelope signal normal output(0V ? +5V) :EG 1 envelope signal reverse output(+5V ˜ 0V) :EG 1 + EG 2 trigger input(GND-->+5V ˜ +15V) :EG 1 + EG 2 trigger input(-->GND) :EG 1 trigger input(-->GND) :EG 2 envelope signal normal output(0V ˜ +5V) :EG 2 envelope signal reverse output(+5V ˜ -5V Caution: Sustain Level=0V)
• MG :Triangle output(Negative Sawtooth ˜ Triangle ˜ Positive Sawtooth)(5Vp-p) :Rectangle output(Wide Pulse ˜ Square ˜ Narrow Pulse)(0 ˜ +5V)
• Noise Generator :Pink noise output(5Vp-p) :White noise output(5Vp-p)
• Sample and Hold :Clock trigger input(-->GND):Sample signal input(5Vp-p max.) :S/H output(5Vp-p max.)
• Modulation VCA :Control voltage input(0 ˜ +5V) :Signal input(-5V ˜ +5V) :Signal output(-5V ˜ +5V)
• TRIG SW :SW On-->TRIG IN(-->GND)
• TRIG SW OUT :Switch output(-->GND)
• JUNCTION :3 x (1 x 3.5mm Stereo mini Phone Jack + 3 x 6.3mm Stereo Phone Jack)

• Signal In : Monaural phone jack
• Signal out: Monaural phone jack: Maximum Output Level 2Vp-p: Output Impedance 3.5kΩ
• Head phones out:Stereo phone jack :Maximum Output Level 48mW (33Ω) :Output Impedance 10Ω
• MIDI :MIDI Input
• * Only note messages (velocity is not used) can be received
• * MIDI CH (1 - 16) can be changed
• USB :Type B, USB-MIDI Input/Output * Only note messages (velocity is not used) can be transmitted and received * MIDI CH (1 - 16) can be changed

• Power Consumption: 9.24W
• Power Supply: DC12V
• Dimensions(W) x (D) x (H): 587 x 211 x 104 mm /23.11" x 8.31" x 4.09"
• Weight: 4 kg / 8.82 lbs.
• Sequencer Mode: ALTERNATE—ORDER—PARALLEL TURN—PARALLEL ORDER—CV/DUTY—CV/SLIDE—CV/DUTY | RANDOM—RANDOM
• Step Mode: GATE ON/OFF—ACTIVE STEP—SLIDE—STEP JUMP
• Sequence Step Resolution: quarter notes, eighth notes, sixteenth notes
• CV OUT Pitch: Linear, Minor, Major, Chromatic
• CV OUT Voltage: 1V, 2V, 5V (Oct) 8V (/V)
• GATE OUT Polarity: + (positive polarity), - (negative polarity)
• SYNC IN/OUT Polarity: + (rise), - (fall)

• littleBits OUT jack (mini monaural phone jack)
• OUT (MIDI OUT) jack (mini stereo phone jack)
• CV - A OUT - GATE jack (mini monaural phone jack, CV OUT : Output level 1V, 2V, 5V, 8[Hz/V], GATE OUT: output level 10V)
• CV - BOUT - GATE jack (mini monaural phone jack, CV OUT : Output level 1V, 2V, 5V, 8[Hz/V], GATE OUT: output level 10V)
• IN – SYNC – OUT jack (mini monaural phone jack, SYNC IN: Max input level 20V, SYNC OUT: Output level 5V)
• USB jack (type B, USB MIDI)
• Power Supply: Two AA batteries (alkaline batteries recommended), or USB power
• Battery Life: approximately 5 hours (when using alkaline batteries)
• Dimension(W x D x H): 193 x 84 x 63 mm/7.60" x 3.31" × 2.48"
• Weight: 641 g/1.41 lbs.