Shure SCM820 8 Channel Digital Automatic Mixer
Designed for use in speech applications including sound reinforcement, broadcasting, and recording, the SCM820 uses IntelliMix® technology to dramatically improve audio quality when many channels of microphones need to operate simultaneously. Multiple I/O configurations and networking options ensure analog and digital connectivity between devices.
Features: IntelliMix Technology:
- Delivers seamless automatic mixing and reduced background noise through dynamic channel gating and attenuation
- NAT (Noise Adaptive Threshold) continuously adjusts the activation threshold for opening a channel
- Number of Open Microphones Attenuation (NOMA) determines the amount of gain attenuation for a mix output when the number of active microphones changes
- Last Mic Lock-On (LMLO) keeps the most recently activated microphone open until another microphone is activated
- MaxBus ensures that only one channel is opened per sound source, reducing comb filtering for clear and intelligible speech
- IntelliMix Modes offer five different mixer mode presets of reliable automixing styles (Classic, Smooth, Extreme, Custom, or Manual) to quickly tailor the mix for a particular application
Enhanced I/O support for greater application flexibility and digital connectivity:
- DB25 or logic-enabled block connector models available, each with 8 inputs
- Per-channel direct outputs allow the SCM820 to be used as an insert processor
- Mix A and B outputs with selectable mic or line level connect to a sound reinforcement system, mixing console, or recording device
- Dual mixer operation enables routing of independent automixes to the mix A and B outputs, allowing two entirely different mixes to result from the same set of inputs
- Aux inputs on both the front and back panel easily connect to media players
- ¼" (6.35 mm) stereo headphone output for channel solo and mix monitoring
Comprehensive Control:
- Channel control knobs allow quick adjustment of gain, limiter, and EQ settings, and solo/mute functions on input channels
- Output mix controls and meters enable front-panel master gain and limiter control as well as signal monitoring
- LED meter rings display input audio or IntelliMix gain levels for each channel
- Browser-based control software delivers comprehensive software control, monitoring, routing, and configuration of all signals and settings and adds a parametric 8-band EQ
Advanced Networking:
- Standard Ethernet or Dante™ digital networked audio configurations available
- Dante-equipped models enable multi-channel audio networking over Ethernet
- Dante upgrade card available for standard Ethernet models
- Link Dante-equipped SCM820 mixers to form large automixes of up to 12 units (96 channels of audio)
- Control system compatible (AMX, Crestron)
Digital Feedback Reduction: - Two channels of patented Shure DFR (Digital Feedback Reduction)
- Assignable to input channels and mix outputs
- Automatic feedback detection and filter deployment
- Up to 16 filters per channel
- 25 Hz to 20 KHz bandwidth
- Up to 18 dB gain reduction per filter
- Selectable low / high Q filter width (1/40th or 1/70th octave)
- “Freeze” feature that locks depth and frequency of existing filters to avoid unwanted automatic changes
- Auto-clear on power cycle or timeout that returns filter settings to a pre-defined state for the next event
- Ability to save current settings to use later or load preexisting setups
IntelliMix Technology:
- Delivers seamless automatic mixing and reduced background noise through dynamic channel gating and attenuation
- NAT (Noise Adaptive Threshold) continuously adjusts the activation threshold for opening a channel
- Number of Open Microphones Attenuation (NOMA) determines the amount of gain attenuation for a mix output when the number of active microphones changes
- Last Mic Lock-On (LMLO) keeps the most recently activated microphone open until another microphone is activated
- MaxBus ensures that only one channel is opened per sound source, reducing comb filtering for clear and intelligible speech
- IntelliMix Modes offer five different mixer mode presets of reliable automixing styles (Classic, Smooth, Extreme, Custom, or Manual) to quickly tailor the mix for a particular application
Enhanced I/O support for greater application flexibility and digital connectivity:
- DB25 or logic-enabled block connector models available, each with 8 inputs
- Per-channel direct outputs allow the SCM820 to be used as an insert processor
- Mix A and B outputs with selectable mic or line level connect to a sound reinforcement system, mixing console, or recording device
- Dual mixer operation enables routing of independent automixes to the mix A and B outputs, allowing two entirely different mixes to result from the same set of inputs
- Aux inputs on both the front and back panel easily connect to media players
- ¼" (6.35 mm) stereo headphone output for channel solo and mix monitoring
Comprehensive Control:
- Channel control knobs allow quick adjustment of gain, limiter, and EQ settings, and solo/mute functions on input channels
- Output mix controls and meters enable front-panel master gain and limiter control as well as signal monitoring
- LED meter rings display input audio or IntelliMix gain levels for each channel
- Browser-based control software delivers comprehensive software control, monitoring, routing, and configuration of all signals and settings and adds a parametric 8-band EQ
Advanced Networking:
- Standard Ethernet or Dante™ digital networked audio configurations available
- Dante-equipped models enable multi-channel audio networking over Ethernet
- Dante upgrade card available for standard Ethernet models
- Link Dante-equipped SCM820 mixers to form large automixes of up to 12 units (96 channels of audio)
- Control system compatible (AMX, Crestron)
Digital Feedback Reduction:
- Two channels of patented Shure DFR (Digital Feedback Reduction)
- Assignable to input channels and mix outputs
- Automatic feedback detection and filter deployment
- Up to 16 filters per channel
- 25 Hz to 20 KHz bandwidth
- Up to 18 dB gain reduction per filter
- Selectable low / high Q filter width (1/40th or 1/70th octave)
- “Freeze” feature that locks depth and frequency of existing filters to avoid unwanted automatic changes
- Auto-clear on power cycle or timeout that returns filter settings to a pre-defined state for the next event
- Ability to save current settings to use later or load preexisting setups
