Clear-Com Intercom System Combo Wired Plus Wireless Bundle with 10 Headsets

Write a review Q&A SKU: PA-PACK-1013 PSSL ID#: 106527
1 of 1
Regular price $16,873.80 USD
or as low as $468.71 per month. Additional restrictions may apply.

PSSL Loyalty points

You will receive 4000 points. Learn more about our loyalty program

Available options

Product attributes

  • Free shipping

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.


Clear-Com Combo Wired Plus Wireless Bundle

Bundle Includes:
  • 1x Clear-Com BS410 Base Station for DX410 System
  • 1x Clear-Com MS-702 Main Intercom Station
  • 4x Clear-Com BP410 Belt Pack for DX410 Base Station
  • 4x Clear-Com CC-15 Single Ear Noise-Canceling Headset
  • 6x Clear-Com CC-300 Single-Ear Standard Headset
  • 6x Clear-Com RS-701 Encore Partyline Belt Pack
  • 1x Clear-Com AC50 4-Port Battery Charger for BAT50

Clear-Com BS410 Base Station for DX410 SystemThe BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.

Clear-Com MS-702 Main Intercom StationCompact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two channels.

Clear-Com BP410 Belt Pack for DX410 Base StationThe BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.

Clear-Com CC-15 Single Ear Noise-Canceling HeadsetCC-15 is a single-ear headset with noise-cancelling microphone for DX Series wireless intercom.

Clear-Com CC-300 Single-Ear Standard HeadsetThe CC-300 single-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone that provide high quality audio. The headset has a flexible design and a soft-ear pad to offer superior comfort. Able to rotate 300 degrees, the microphone boom acts as an on/off switch for quick microphone muting.

Clear-Com RS-701 Encore Partyline Belt PackThe RS-701 is a single-channel analog belt pack with an XLR-3 line connector and XLR-4M headset connector. A microphone preamp with a dynamic range of 130dB enables intelligible voice communication for every volume level, from a whisper to a shout. The belt pack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-701 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

Clear-Com AC50 4-Port Battery Charger for BAT50The AC50 is a battery charger for the BAT50 batteries. The AC50 can charge up to four BAT50s simultaneous with additional reserve slots for four extra batteries. Charge time is 2.5 hours.

Clear-Com BS410 Features:

  • Two-channels
  • 7kHz wideband audio
  • 2-wire and 4-wire bridging
  • 2-wire auto-nulling
  • Lost packet concealment
  • Upgraded radio
  • Supports up to 15 beltpacks and/or wireless headsets

Clear-Com MS-702 Features:

  • Channel A-B linking
  • Program input with individual channel level controls
  • Remote mic kill switch
  • External relay circuit
  • Stage announce
  • Dimensions: 19" x 1.75" x 6.5" (WxHxD)

Clear-Com BP410 Features:

  • Two-channel
  • 7kHz wideband audio
  • Up to 15 beltpacks and/or all-in-one handsets on a single system
  • Single or dual-channel operation
  • Up to 12 hours of battery life
  • Channels: 2 audio channels
  • Frequency Range: 2400 MHz – 2483.5 MHz
  • Frequency Response: 200 Hz – 7 kHz
  • Antenna: Internal, horizontal/vertical diversity
  • Headset Connector: 4-pin, mini-DIN
  • Microphone: Electret
  • Headset Output: 160mW into 32 Ohms
  • Communication Security: 64-bit encryption
  • System Distortion: <2%
  • Controls: Power, Volume-Up, Volume-Down, A, B, ISO
  • Indicators: Dual-color LED (red/green)
  • Battery Requirements: 3.6V lithium-ion
  • Battery Life: Up to 12 hours
  • Antenna: Internal, Horizontal/Vertical diversity
  • Transmitter
    • Type: Frequency Hopping, Spread Spectrum (FHSS)
    • Transmit Power: 100mW burst
    • Modes: Momentary or Latch
    • Type: Gaussian filtered FSK, TDMA
    • Frequency Stability: 13 ppm
    • Harmonics/Spurious: Exceeds FCC and ETSI specifications
  • Receiver
    • Type: Frequency Hopping, Spread Spectrum (FHSS)
    • RF Sensitivity:
    • Frequency Stability: 13 ppm
    • Distortion: <2%
  • Environmental: 32°F to +122°F (0°C to +50°C)
  • Dimensions: 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
  • Weight: 7.4 oz (0.21 kg) including battery and pouch

Clear-Com CC-15 Features:

  • Single Ear Headset
  • Enclosed Ear Phone
  • Leatherette
  • Type of Microphone: Electret
  • Microphone Unit:
    • Impedance: 2.2k Ohm +30%
    • Sensitivity: -51dB, +3dB (0dB - 1V/Pa, 1kHz)
  • Speaker Unit:
    • Impedance: 40 Ohms +15% (1kHz)
    • Max Power: 100mW (2.0V RMS)
    • Frequency Range: 20Hz - 20kHz (-15dB/1kHz)
    • Output SPL: 106dB = +2.0dB
    • Input: 1mW (0.2V RMS)
  • Weight: 6oz (170g) without cable, 8.1oz (230g) with cable

Clear-Com CC-300 Features:

  • Type: closed-back
  • Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
  • Headphone frequency response: 40Hz - 20kHz
  • Microhpone element: dynamic
  • Microphone polar pattern: hyper-cardioid
  • Microphone frequency response: 300Hz - 20kHz
  • Open circuit sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical, 102 dB ±3 dB; at 1kHz typical
  • Impedance: 400 ohms ±30%; at 1kHz typical
  • Microphone: 200 ohms ±30%; at 1kHz typical
  • Connector cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
  • Includes drawstring carry bag

Clear-Com RS-701 Features:

  • Microphone pre-amplifier
    • Microphone to Line (without limiter acting) frequency response: 280 – 15k Hz ± 3dB
    • Microphone output to line – audio level (-50dBm Electret input): -9dBm
    • Microphone output to line – distortion: <0.1%
    • Microphone output to line – signal to noise: >65dB
    • Clear-com sound: yes
  • Headphone amplifier
    • Frequency response – line to headphone: 150 – 20k Hz ± 3dB
    • Headphone input from line – audio level (-9dBm Electret input): 3.5dBm
    • Headphone input from line – distortion: <0.5%
    • Headphone input from line – signal to noise: >50dB
    • Earphone to mic – crosstalk: >80dB
    • Sidetone – adjustment range (-80db mic input): >45dB
  • Keypad indicators: power: green LED; talk: green LED; call: orange LED
  • Connectors: intercom line: (2) 3-pin XLR–M–F: channel 1 2-Wire intercom channel pin 1: common; Pin 2: PL power (+28VDC); pin 3: line (Audio)
  • Headset: 4-pin XLR–M: headset connector pin 1: mic - (Mic Common); pin 2: mic +; pin 3: spkr-; pin 4: spkr+


Write a review


Questions & Answers

Ask a question

You may also like

  • PSSL Customer Support Image

    Ask the experts

    Our expert team guides customers towards the best equipment solutions, ensuring unparalleled performance and customer satisfaction.

    Ask an expert here 
  • Financing Options

    We offer flexible financing options, starting at 0% APR. Our financing plans provide customers with the opportunity to acquire top-quality audio, DJ, and lighting equipment with ease and convenience.

    Explore more financing options 
  • Rewards Program

    Join our Rewards Program today and enjoy the benefits of smart shopping!

    Visit our rewards page