Clear-Com RS-601 1-Channel Communication Belt Pack Station
The RS-601 offers all the performance and durability of Clear-Com’s world-standard beltpacks, plus TW compatibility. You can use the RS-601 on a TW line (Audio on Channel B) without loading down Channel A.
Features:
- One intercom channel
- 3-pin female and male XLR connectors for ease of setup
- 4-pin male XLR to connect a headset
Specifications:
- General
- Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and shortcircuit protected.
- Signal to Noise: >75 dB
- Bridging Impedance: >15k
- Line Level: -14 dB, +5 dB max.
- Sidetone Adjust: >35 dB
- EMI and RFI rejection: >60 dB
- Microphone Pre-Amplifier
- Headset Mic Impedance: 200 ohms
- Gain, mic to line: 41 dB (dynamic)
- Limiter Range: 26 dB
- Frequency Response: 200 Hz – 12 kHz contoured for intelligibility
- Headphone Amplifier
- Load Impedance: 50 - 2,000 ohms
- Output Level: +17 dBv before clipping
- Distortion: <0.1% THD @ 1 kHz
- Gain, line to output: +34 dB
- Frequency Response: 100 Hz - 18 kHz, ±2dB
- Connectors
- Intercom Line: (2) 3-pin XLR–M–F
- Headset: 4-pin XLR–M
- Power Requirements
- 26mA quiescent
- 30mA average talk
- 50mA talk with signaling
- DC Voltage Range: 12-32 volts
- Environmental
- Operating Temp. Range: 0°C - 70°C (32°F - 158° F)
- Humidity: 0 - 90% relative humidity
- Dimensions
- 4.58"H x 3.73"W x 1.34"D (116 x 95 x 34 mm)
- Weight
- 7.3 oz. (0.20 kg)
- General
- Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and shortcircuit protected.
- Signal to Noise: >75 dB
- Bridging Impedance: >15k
- Line Level: -14 dB, +5 dB max.
- Sidetone Adjust: >35 dB
- EMI and RFI rejection: >60 dB
- Microphone Pre-Amplifier
- Headset Mic Impedance: 200 ohms
- Gain, mic to line: 41 dB (dynamic)
- Limiter Range: 26 dB
- Frequency Response: 200 Hz – 12 kHz contoured for intelligibility
- Headphone Amplifier
- Load Impedance: 50 - 2,000 ohms
- Output Level: +17 dBv before clipping
- Distortion: <0.1% THD @ 1 kHz
- Gain, line to output: +34 dB
- Frequency Response: 100 Hz - 18 kHz, ±2dB
- Connectors
- Intercom Line: (2) 3-pin XLR–M–F
- Headset: 4-pin XLR–M
- Power Requirements
- 26mA quiescent
- 30mA average talk
- 50mA talk with signaling
- DC Voltage Range: 12-32 volts
- Environmental
- Operating Temp. Range: 0°C - 70°C (32°F - 158° F)
- Humidity: 0 - 90% relative humidity
- Dimensions
- 4.58"H x 3.73"W x 1.34"D (116 x 95 x 34 mm)
- Weight
- 7.3 oz. (0.20 kg)
