Crestron® HDMI® over Fiber Transmitters and Receivers deliver professional-grade digital HD AV signal extension for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-RX1-F receiver works with an HD-TX1-F transmitter to enable wire runs up to 1000 feet (300 m) over a single multimode fiber strand. The use of fiber not only facilitates long wire runs, but is also ideal for wiring to outdoor devices and between buildings, providing optical isolation against ground loops, lightning surges, and other electrical disturbances. The HD-RX1-F simultaneously handles high-definition digital video and audio, RS-232, and IR signals.
Robust HD Signal Extension
Crestron HDMI over Fiber technology delivers ultra-reliable extension of uncompressed video and computer signals. The HD-RX1-F handles video resolutions up to Full HD 1080p60, and computer resolutions up to UXGA and WUXGA, with support for HDCP and Deep Color. Audio capabilities include support for Dolby Digital®, DTS®, and uncompressed 7.1 linear PCM. In addition to HDMI, the HD-RX1-F is also compatible with DVI display devices using an appropriate adapter or interface cable.
...And Control Too!
In addition to video and audio, the HD-RX1-F provides for the extension of control signals for a true one-wire AV interface solution. Both IR and bidirectional RS-232 control signals may be routed to control a display device or other equipment.
Comprehensive without Complication
Crestron HDMI over Fiber affords a very dependable signal extension solution that's simple to implement. No special configuration or programming is required — just connect your source and display and enjoy high-quality HD video and audio from across the room — or from another entire building. The HD-RX1-F is housed in an attractive, compact enclosure, with provisions for mounting to any flat surface, or to one rail of a 19" EIA equipment rack.
Crestron offers the fiber optic cable, connectors, and termination kit for a complete, easy wiring solution. A range of professional AV interface cables and wall plates is also available to complement the HD-RX1-F for a total custom installation solution.
Extends uncompressed digital video, audio, and control signals 1000 feet (300 m) over a single multimode fiber
Works reliably without any programming or configuration
Supports HDMI® with Deep Color
Also compatible with DVI
Supports 7.1 channel lossless audio up to 48 kHz
Supports DTS® and Dolby Digital® encoded audio
Handles resolutions up to WUXGA 1920x1200 and HD 1080p60
Passes CEC, EDID, and HDCP
Includes universal IR repeater up to 192 kHz
Extends bidirectional RS-232 up to 115k Baud
Provides electrical isolation for outdoor runs
12VDC universal power pack included
Output Signal Types
HDMI® w/Deep Color (DVI compatible)
640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165 MHz pixel clock
720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165 MHz pixel clock
Output Signal Types
Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, LPCM up to 8 channels
Up to 48 kHz
50/125 or 62.5/125 µm multi-mode optical fiber, 1000 ft (300 m) cable length, 850 nm & 1310 nm transmit, 1550 nm receive
(1) 2-pin 3.5 mm detachable terminal block;
IR/Serial repeater output port;
IR output up to 192 kHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
(1) 19-pin Type A HDMI female;
HDMI digital video/audio output (DVI compatible)
(1) 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, software handshaking support
(1) 6-32 screw, chassis ground lug
(1) SC female optical fiber connector;
Multimode fiber input;
Connects to MM OPTICAL port of an HD-TX1-F transmitter via CresFiber 8G fiber optic cable
(1) 2.5 x 5.5 mm DC power connector;
12 Volt DC power input;
PW-1205RU power pack included
Note: Mini USB port is for factory use only.
0.5 Amps @ 12 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-1205RU, included
Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
Freestanding, surface mount, or attach to a single rack rail
5.92 in (150 mm)
3.91 in (100 mm)
1.43 in (37 mm)
14.7 oz (416 g)
Selecting either "Yes" or "No" for each "Was this review helpful?" form within each review will automatically submit your choice.
Questions & Answers
Selecting either "Yes" or "No" for each "Was this answer helpful?" form within each answer will automatically submit your choice.