RED LED FLEX TAPE ROLL
ELATION FLEXLED TAPE is a very thin and flexible LED circuit strip that can be cut every 2" and put back together using simple soldering techniques. It comes available in RGB and Single Color versions. High output, low heat and easy installaton makes this product ideal for a variety of applications.
It’s called tape because the back of the strip uses 3M adhesive glue to tape the LED strip anywhere you need it. It has been prefabricated in a 10’ spool (RGB ver) with 60 x 2" black circuit strips holding 3 SMD chips each for a total of 180 120° SMD LED chips with total power consumption of 43-watts (max. 2pcs with 4A PSU & 8pcs with 12A PSU with amplifier every 3 rolls). Power supplies offered are UL and CSA approved.
The single color spools are 20’ in length with 360pcs SMD single color LED on white flexible circuit strip with the same spacing but direct wire 12v from any standard 12v DC power supply with a total of 86watts per spool (max 1pcs with 4A PSU & max 5pcs in line with 12A PSU).
FLEX RGB TAPE has an optional infrared wireless controller to change colors, select 16 static colors or run color fades or color snap programs. You can use the signal amplifier if there is more than 10pcs in one system or if you want to synchronize multiple zones.
- Avg. Rated Life – 30,000hrs
- LED Spacing – 16.6mm (.65")
- Dimensions – 11.5mm (.45") W x .15mm (.005") D
- Operating Temperature - -40°c to 80°c
- Tape adhesive temperatures - -30°c to 90°c
CALIFORNIA WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.