Martin IP66 PSU Power Supply Unit
The Martin™ IP66 PSU 240W is an IP66-rated external power supply unit that can supply 48 VDC power to various Martin™ lighting and LED Video products, including the Exterior PixLine, Exterior Dot-HP and VC-Dot.
It provides an alternative to the P3 PowerPort in supplying power to fixtures in a DMX-controlled system.
Features:
- Rugged extruded aluminum housing
- Auto-ranging 100-240 VAC power input
- Full protection with auto-recovery
- IP66-rated
- Wall-mountable
- Can be located up to 50 m (164 ft.) away from the creative LED video products
- No configuration or addressing required
Specifications:
Physical
- Length: 314 mm (12.4 in.)
- Width: 68 mm (2.7 in.)
- Height: 39 mm (1.5 in.)
- Weight: 1.5 kg (3.3 lbs.)
System integration
- Exterior PixLine™ family
- Exterior Dot-HPTM family
- VDO Sceptron™ family
- VC-Dot™ family via VC-Feeder™
- VC-Grid™ family (indoor product)
- VC-Strip™ family (indoor product)
- Tripix family
Construction
- Housing: Aluminum
- Finish: Clear anodized
- Protection rating: IP66, NEMA 4X
- RoHS compliant
Installation
- Mounting: Fixation points for surface-mounting
- Orientation: Any
- Max. cable length: See connected product user manuals
- Max. number of connected fixtures: See connected product user manuals
Connections
- AC mains power input
- Hard-wired (terminal block) via cable gland
- 48 VDC power output
- To Tripix: Power Inserter Cable, Martin™ IP66 PSU 240 W to Tripix system, 0.25 m (9.8 in.), P/N 91611339
- To VDO Sceptron: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
- To Exterior PixLine: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
- To Exterior Dot-HP: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
- To VC-Grid: Input Y-Cable, XLR5 + Martin™ IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N 91616039
- To VC-Strip: Input Y-Cable, XLR5 + Martin™ IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N 91616039
- To VC-Feeder (VC-Dot): Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to IP65 connector, 0.25 m (9.8 in.), P/N 11840195
See user manuals of compatible products for latest complete information on suitable cables and connectors, safety limits, etc.
Electrical
- AC power input: 100-240 V nominal, 50/60 Hz
- Power supply unit: Auto-sensing multi-voltage switch-mode
- DC power output: 48 V
- Maximum DC output power: 240 W
- Maximum DC output current draw: 5 A
- Protection: Overvoltage, overcurrent, short circuit, over-temperature, all with auto-recovery
Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45° C (113° F)
- Minimum ambient temperature (Ta min.): -30° C (-22° F)
- Maximum surface temperature, steady state, Ta=45° C (113° F): 80° C (176° F)
- Total heat dissipation (calculated, including max. number of connected devices, all at full load): 820 BTU/hr.
Approvals
- EU safety: EN 60598-2-6, EN 61347-2-13
- EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1012
- Canadian safety: CSA C22.2 No. 107.1
- Australia/NZ: RCM
Accessories
- Power Inserter Cable, Martin™ IP66 PSU 240 W to Tripix™ system: P/N 91611339
- Input Y-Cable, 5-pin XLR + Martin™ IP66 PSU 240W to BBD, 0.25m (9.8 in.): P/N 91616050
- Input Y-Cable, 5-pin male XLR + Martin™ IP66 PSU 240W to 4-pin fem. XLR, 0.25 m (9.8 in.): P/N 91616039
- Input Y-Cable, 5-pin male XLR + Martin™ IP66 PSU 240W to IP65, 0.25 m (9.8 in.): P/N 11840195
Ordering Information
- Martin™ IP66 PSU 240 W (replaces Tripix™ Power IP66):P/N 90760330
