Martin JEM Roadie Compact DMX Dense Fog Machine
Martin's industry-standard Jem Roadie X-Stream is now available in a high-output, compact version.
Features:- Onboard DMX, 3 and 5 pin
- Pre-programmed stand-alone macros
- On-board control panel
- For vertical or horizontal effect projection
- Output and density level control
- Continuous output
- 2500 m³/min fog output Integrated high velocity fan
- 2 x 1500 W heat exchanger
- 9 min heat-up time
- 9.5 liter fluid capacity
- Low fluid sensing
Performance
- Max. fog output (approx.): 2500 m3 per minute
- Max. operating time at full output (approx.): 90 minutes
- Operating time: Continuous, automatic level adjustment
- Warm-up time (approx.): 9 minutes
- Control options: Onboard control panel, DMX
- Compatible remote controls: For limited control
- DMX channels: 2 (output and fan)
- Protocol: USITT DMX512/1990
- Housing: Steel and aluminum
- Heat exchanger: 2 x 1500 W, direct thermal protection
- Fluid pump: Oscillating piston, high pressure X2
- Onboard fluid capacity: 9.5 l
- Fluid consumption at peak output: 220 ml per minute
- Orientation: Floor mount (Horizontal or vertical) or flying kit
- Remote control: 3-pin locking XLR
- DMX data: 3-pin and 5-pin XLR sockets
- Power cable entry: Hard-wired
- AC power: 208 V 60 Hz / 220 - 240 V 50 Hz
- Main fuse (208-240 V power): Onboard 16 A Breaker
- 208 V, 60 Hz: 2450 W, 12.7 A
- 220 V, 50 Hz: 2745 W, 12.5 A
- 230 V, 50 Hz: 3000 W, 13.04 A
- 240 V, 50 Hz: 3267 W, 13.6 A
- Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
- Maximum ambient temperature (Ta max.): 40° C
- Exterior surface temperature, steady state: 50° C
- Max. nozzle temperature: 200° C
- User manual
- Container 9.5 l
- Hard wired mains cable 2 m: Pre-Installed
- Flying kit: Pre-Installed
- Length: 800 mm
- Width: 500 mm
- Height: 600 mm
- Dry weight: 80 kg
