Meyer Sound 900-LFC Low-Frequency Array Loudspeaker with Remote Monitoring System, 3-Pin XLR, and Rig

More Meyer Sound products

Write a review Q&A SKU: 900-LFC-STD-3XLR-RIG PSSL ID#: 114635
1 of 2
Available options

Product attributes

You can get it quickly!

This isn't something we usually keep in stock, but we can typically get it very quickly from the vendor. Please place your order, and we'll let you know when to expect it.

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.

Description

Meyer Sound 900-LFC Low-Frequency Array Loudspeaker with Remote Monitoring System, 3-Pin XLR, and Rig

Meyer Sound’s 900-LFC compact low-frequency control element reproduces low frequencies at high continuous output levels with extremely low distortion. The 900-LFC offers the same sonic linearity as Meyer Sound’s 1100-LFC low-frequency control element in a smaller, lighter cabinet, making it ideal for building scalable systems to suit touring applications or fixed installations of any size.

Features:

  • Compact cabinet with small footprint and extraordinary power-to-size ratio
  • High peak power output with extremely low distortion
  • Exceptional linearity, transient reproduction, and low-frequency clarity
  • Self-powered for simplified setup and increased reliability
  • Stackable and flyable in regular and cardioid arrays, with tilt and splay options
  • Integral pole-mount receptacle easily pairs the subwoofer with ULTRA Series loudspeakers

Specifications:

  • Acoustical:
    • Operating Frequency Range: 31 Hz – 125 Hz
    • Frequency Response: 32 Hz – 115 Hz ±4 dB
    • Phase Response: 40 Hz – 110 Hz ±30°
    • Linear Peak SPL: 133 dB with crest factor >10 dB (M-noise), 133 dB (Pink noise), 134.5 dB (B-noise)
  • Coverage: 360° (single unit); varies with number of units and configurations
  • Transducers:
    • Low Frequency: One 18-inch, dual-coil, long-excursion cone driver; 2Ω nominal impedance
  • Audio Input:
    • Type: Differential, electronically balanced
    • Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
    • Connectors: XLR 3-pin female connectors available to accommodate only balanced audio (no RMS signals)
    • Input Impedance: 10 kΩ differential between pins 2 and 3
    • Wiring:
      • Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequenciess
      • Pin 2: Signal +
      • Pin 3: Signal -
      • Case: Earth ground and chassis
    • Nominal Input Sensitivity: 6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
    • Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeakerr
  • Amplifier:
    • Type: Two-channel, open-loop, class D
    • Total Output Power: 3100 W peak
    • THD, IM, TIM: < 0.02%
    • Cooling: Convection
  • AC Power:
    • Connectors: powerCON 20 input with loop output
    • Automatic Voltage Selection: 90–265 V AC; 50–60 Hz
    • Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
    • Turn-on and Turn-off Points: Turn-on: 90 V AC; Turn-off: none; internal fuse protection above 265 V AC
  • Current Draw:
    • Idle : 0.60 A rms (115 V AC), 0.49 A rms (230 V AC), 0.63 A rms (100 V AC)
    • Maximum Long-Term Continuous Current (>10 sec): 4.9 A rms (115 V AC); 2.5 A rms (230 V AC); 5.2 A rms (100 V AC)
    • Burst Current (<1 sec): 8.8 A rms (115 V AC), 4.7 A rms (230 V AC), 11.0 A rms (100 V AC)
    • Maximum Instantaneous Peak Current: 18.2 A peak (115 V AC), 9.2 A peak (230 V AC), 20.6 A peak (100 V AC)
    • Inrush Current: < 20.0 A peak
  • RMS Network: Equipped with two-conductor, twisted-pair network; reports all amplifier operating parameters to host computers
  • Physical:
    • Dimensions with Rigging: W: 27.47 in (698 mm) x H: 24.43 in (621 mm) x D: 24.89 in (632 mm)
    • Weight with Rigging: 159 lb (72.1 kg)
    • Enclosure: Premium multi-ply birch with slightly textured black finish
    • Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
    • Rigging: Optional end frames with captive GuideALinks secured with 0.3125 in x 0.63 in quick release pins that allow 0°, 1.25°, 2.5°, 3.75°, or 5° splay angles; detachable side handles. Rigging supports ground-stacked, flown, and cardioid configurations.
    • Pole Mount: U.S. version: 1.5 in (38 mm), E.U. version: 1.375 in (35 mm and M20 thread at the bottom)

MRK-900 RIGGING KIT

The optional MRK-900 rigging kit allows the 900-LFC to be flown and groundstacked with the MG-LEOPARD/900 multipurpose grid. The kit also allows 900-LFCs to be flown and groundstacked with LEOPARD with no transition hardware. The rigging kit is available as a factory-installed option or as a field upgrade and uses rugged GuideALinks and intuitive quick-release pins to securely link adjacent loudspeakers in flown and groundstacked array configurations.

Reviews

Write a review

Score

Questions & Answers

Ask a question

You may also like

  • Ask the experts

    Our expert team guides customers towards the best equipment solutions, ensuring unparalleled performance and customer satisfaction.

    Ask an expert here 
  • Financing Options

    We offer flexible financing options, starting at 0% APR. Our financing plans provide customers with the opportunity to acquire top-quality audio, DJ, and lighting equipment with ease and convenience.

    Explore more financing options 
  • Rewards Program

    Join our Rewards Program today and enjoy the benefits of smart shopping!

    Visit our rewards page