Meyer Sound Acheron Designer Screen Channel Loudspeaker for Cinema Applications with 3-Pin XLR

More Meyer Sound products

Write a review Q&A SKU: ACHERON-DESIGNER-STD-3XLR PSSL ID#: 114765
1 of 1
Available options

Product attributes

  • Free shipping
You can get it quickly!

This isn't something we usually keep in stock, but we can typically get it very quickly from the vendor. Please place your order, and we'll let you know when to expect it.

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.

Description

Meyer Sound Acheron Designer Screen Channel Loudspeaker for Cinema Applications with 3-Pin XLR

The Acheron Designer uses the same patent pending horn technology and high-frequency compression driver as the other Acheron models, delivering the same 38 Hz to 17 kHz frequency response. This consistency of fidelity between Acheron models ensures that soundtracks monitored with the Acheron Designer translate accurately when played back in larger rooms with the Acheron 100, Acheron 80, Acheron Studio, or other calibrated cinema system.

Features:

  • High peak power output with ultralow distortion
  • Exceptional fidelity and extended high frequency performance
  • Constant-Q horn yields uniform response throughout coverage area
  • Extraordinarily flat amplitude and phase response for tonal accuracy
  • Seamless integration with HMS-10 surround loudspeakers and X-800C subwoofer

Specifications:

  • Acoustical:
    • Operating Frequency Range: 37 Hz – 18 kHz
    • Frequency Response: 38 Hz – 17 kHz ±4 dB
    • Phase Response: 230 Hz – 17 kHz ±30°
    • Maximum Peak SPL: 130 dB
    • Dynamic Range: >110 dB
  • Coverage: 80° horizontal x 50° vertical
  • Crossover: 680 Hz
  • Transducers:
    • Low Frequency:
      • 12" low-frequency cone driver
      • Nominal impedance: 2 Ω
      • Voice coil size: 4"
    • High Frequency:
      • 4" compression driver
      • Nominal impedance: 8 Ω
      • Voice coil size: 4"
      • Diaphragm size: 4"
      • Exit size: 1.5"
  • Audio Input:
    • Type: Differential, electronically balanced
    • Maximum Common Mode Range: ±5 V DC, clamped to earth for voltage transient protection
    • Connectors: Female XLR input with male XLR loop output
    • Input Impedance: 10 kΩ differential between pins 2 and 3
    • Wiring:
      • Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequencies
      • Pin 2: Signal +
      • Pin 3: Signal -
      • Case: Earth ground and chassis
    • DC Blocking: Differential DC blocking up to the maximum common mode voltage
    • CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
    • RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
    • TIM Filter: Integral to signal processing (<80 kHz)
    • Nominal Input Sensitivity: 10 dBV (3.2 V rms) continuous is typically the onset of limiting for noise and music
    • Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
  • Amplifier:
    • Type: Two-channel, Class-D
    • Output Power: 700 W (1 x 550 W, 1 x 250 W)
    • Total Output: 1400 W peak
    • THD, IM, TIM: < 0.02%
    • Load: 2 Ω low channel; 8 Ω high channel
    • Cooling: Convection, with recessed heat sink
  • AC Power:
    • Connectors: PowerCon® loop output
    • Voltage Selection: Automatic, continuous range from 90 V AC to 265 V AC
    • Safety Agency Rated Operating Range: 100–240 V AC, 50/60 Hz
    • Turn-on and Turn-off Points: 90 V AC on, no turn-off, only fuse-protect above 265 V AC
    • Current Draw: Idle Current: 0.23 A rms (115 V AC); 0.19 A rms (230 V AC); 0.24 A rms (100 V AC)
    • Maximum Long-Term Continuous Current (>10 sec): 1.58 A rms (115 V AC); 0.83 A rms (230 V AC); 1.78 A rms (100 V AC)
    • Burst Current (<1 sec): 3.1 A rms (115 V AC); 1.4 A rms (230 V AC); 3.6 A rms (100 V AC)
    • Ultimate Short-Term Peak Current Draw: 12.0 A peak (115 V AC); 8.0 A peak (230 V AC); 12.4 A peak (100 V AC)
    • Inrush Current: 25 A peak (115 V AC); 54 A peak (230 V AC); 20 A peak (100 V AC)
  • Physical:
    • Dimensions: 19.00" w x 25.38" h x 14.58" d (483 mm x 645 mm x 370 mm) without optional grille frame
    • Weight: 76 lbs (34.5 kg) without optional grille frame
    • Enclosure: Premium birch plywood
    • Finish: Low gloss, black textured
    • Protective Grille: Attachment points on cabinet front corners for optional grille frame with black cloth
    • Rigging: Two threaded M6 attachment points on cabinet bottom for optional MYA-DES cradle-style yoke

Reviews

Write a review

Score

Questions & Answers

Ask a question

You may also like

  • Ask the experts

    Our expert team guides customers towards the best equipment solutions, ensuring unparalleled performance and customer satisfaction.

    Ask an expert here 
  • Financing Options

    We offer flexible financing options, starting at 0% APR. Our financing plans provide customers with the opportunity to acquire top-quality audio, DJ, and lighting equipment with ease and convenience.

    Explore more financing options 
  • Rewards Program

    Join our Rewards Program today and enjoy the benefits of smart shopping!

    Visit our rewards page