Meyer Sound Amie-Sub 7.1 Compact Subwoofer with DB-25 Connector
The linear, self-powered Amie-Sub compact subwoofer offers outstanding sonic characteristics, such as clean, punchy transients and excellent phase coherence with impressive low-frequencies down to 22 Hz in a compact cabinet. The Amie-Sub was specifically designed to be the perfect companion for Amie precision monitors—creating a complete system by extending the system frequency response down to the lower limit of the audible range with easy integration in multi-channel configurations. In addition, due its performance and versatility, the Amie-Sub is equally suited to complement other Meyer Sound loudspeakers, such as HMS-5, HMS-10, HMS-12, and HMS-15 in immersive surround applications or across other more general applications with Ultra Series loudspeakers.
Features:
- Linear frequency, phase and amplitude response with sonic accuracy at any level with high peak power output and excellent transient reproduction
- Extended low frequency range down to 22 Hz
- Extremely low distortion for exceptional low-frequency clarity
- Optional modules allow seamless integration with Amie precision monitors to create bass-managed stereo systems and immersive systems up to 7.1
- Self-powered design simplifies setup and increases reliability
- Integrates with HMS-5, HMS-10, HMS-12 and HMS-15 surround loudspeakers in immersive applications
- Integrates with Ultra Series loudspeakers in general applications.
- Optional U-bracket allows flexibility of mounting in ceilings
Specifications:
- Acoustical:
- Operating Frequency Range: 22 Hz – 160 Hz
- Frequency Response: 25 Hz – 145 Hz ±4 dB
- Phase Response: 33 Hz – 145 Hz ±30°
- Linear Peak SPL: 124.5 dB with >11.5 dB crest factor (M-noise), 124.5 dB (Pink noise), 126 dB (B-noise))
- Coverage: 360° (single unit); varies with number of units and configuration
- Transducers:
- Low Frequency: One 15 inch long-excursion cone driver; 3 Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for transient voltage protections
- Input Impedance: 10 kΩ differential between Audio(+) and Audio(– )
- Wiring:
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 6 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Looping Input Module Connectors: XLR 3-pin female with male loop output
- 7.1 Integration Module Connectors:
- DB-25 female connector inputs (channels 1 to 7 and LFE)
- DB-25 female connector outputs (channels 1 to 7 and LFE + bass management)
- Amplifier:
- Type: 2-channel, open-loop, class D
- Total Output Power: 1100 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Convection
- AC Power:
- Connectors: powerCON 20 input with loop output to feed Amie loudspeakers
- Voltage Selection: 90–265 V AC
- Safety Agency Rated Operating Range: 100–240 V AC, 50–60 Hzz
- Turn-on and Turn-off Points: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
- Current Draw:
- Idle Current: 0.25 A rms (115 V AC); 0.23 A rms (230 V AC); 0.25 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 1.4 A rms (115 V AC); 0.7 A rms (230 V AC); 1.5 A rms (100 V AC)
- Burst Current (<1 sec): 2.9 A rms (115 V AC); 1.5 A rms (230 V AC); 3.4 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 7.4 A peak (115 V AC); 3.7 A peak (230 V AC); 8.5 A peak (100 V AC)
- Inrush Current: <20.0 A peak
- Physical:
- Dimensions: W: 24.00 in (609 mm) x H: 17.5 in (444 mm) x D: 19.00 in (482 mm))
- Weight: 74 lb (33.5 kg)
- Enclosure: Premium multi-ply birch with low-gloss, slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with optional black cloth grille that attaches to the steel grille
- Rigging: Side nut-plates with 3/8-inch by 16 threads for the optional MUB-Amie-Sub U-bracket
- Acoustical:
- Operating Frequency Range: 22 Hz – 160 Hz
- Frequency Response: 25 Hz – 145 Hz ±4 dB
- Phase Response: 33 Hz – 145 Hz ±30°
- Linear Peak SPL: 124.5 dB with >11.5 dB crest factor (M-noise), 124.5 dB (Pink noise), 126 dB (B-noise))
- Coverage: 360° (single unit); varies with number of units and configuration
- Transducers:
- Low Frequency: One 15 inch long-excursion cone driver; 3 Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for transient voltage protections
- Input Impedance: 10 kΩ differential between Audio(+) and Audio(– )
- Wiring:
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 6 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Looping Input Module Connectors: XLR 3-pin female with male loop output
- 7.1 Integration Module Connectors:
- DB-25 female connector inputs (channels 1 to 7 and LFE)
- DB-25 female connector outputs (channels 1 to 7 and LFE + bass management)
- Amplifier:
- Type: 2-channel, open-loop, class D
- Total Output Power: 1100 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Convection
- AC Power:
- Connectors: powerCON 20 input with loop output to feed Amie loudspeakers
- Voltage Selection: 90–265 V AC
- Safety Agency Rated Operating Range: 100–240 V AC, 50–60 Hzz
- Turn-on and Turn-off Points: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
- Current Draw:
- Idle Current: 0.25 A rms (115 V AC); 0.23 A rms (230 V AC); 0.25 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 1.4 A rms (115 V AC); 0.7 A rms (230 V AC); 1.5 A rms (100 V AC)
- Burst Current (<1 sec): 2.9 A rms (115 V AC); 1.5 A rms (230 V AC); 3.4 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 7.4 A peak (115 V AC); 3.7 A peak (230 V AC); 8.5 A peak (100 V AC)
- Inrush Current: <20.0 A peak
- Physical:
- Dimensions: W: 24.00 in (609 mm) x H: 17.5 in (444 mm) x D: 19.00 in (482 mm))
- Weight: 74 lb (33.5 kg)
- Enclosure: Premium multi-ply birch with low-gloss, slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with optional black cloth grille that attaches to the steel grille
- Rigging: Side nut-plates with 3/8-inch by 16 threads for the optional MUB-Amie-Sub U-bracket
