Meyer Sound DCP 72-Channel Core Signal Processor
The DCP is a 2U rackmountable processing module for the D-Mitri digital audio platform which provides complete audio processing for up to 72 inputs, outputs, and internal buses. The DCP receives audio inputs from and sends outputs to D-Mitri audio interfaces via the system’s AVB-enabled Ethernet network. Audio travels between the DCP and DCM-2 or DCM-4 matrix mixing modules over Matrix Link, a dedicated, ultra-low latency Ethernet connection carrying audio streams at a 96 kHz sample rate and 32-bit resolution. All processing is fully dynamic under the control of D-Mitri’s CueStation software.
Features:
- Provides complete audio processing for up to 72 inputs, outputs and internal buses
- Processing dynamically controlled by CueStation software
- Processes streams of up to 32 bits of resolution at 96 kHz sample rate
- Sends and receives audio to and from D-Mitri's matrix mixing modules (DCM) over Matrix Link
- Sends and receives audio to and from D-Mitri's I/O modules over AVB
- Sends and receives audio to and from D-Mitri¹s Ethernet/AVB network
- Redundant control port
- Additional redundant AVB port
- Additional redundant Matrix Link port
Specifications:
- Digital Audio and Control
- Network:
- Two AVB-enabled Ethernet ports for connection to D-Mitri interfaces
- Two Matrix Link ports for connection to D-Mitri DCM-2 and DCM-4 matrix mixing/routing modules
- Software Control: Full bidirectional communication with D-Mitri processors for control by CueStation software within a client-server architecture, as well as external control via Open Sound Control protocol
- Control Connections: The DCM-2 has two control ports for redundant control from a backup network or controller.
- AC Power
- Connector: PowerCon®
- Operating Voltage Range: 100–240 V AC, 50-60 Hz
- Power Consumption: 150 W maximum
- PHYSICAL
- Dimensions:
- Two rack spaces
- 19" w x 3.5" h x 15.9" d
- (483 mm x 89 mm x 404 mm)
- Weight: 23 lbs.
- Notes
- System Requirements: D-Mitri requires a Gigabit Ethernet infrastructure
- Cabling: Cat-5e or Cat-6
- Digital Audio and Control
- Network:
- Two AVB-enabled Ethernet ports for connection to D-Mitri interfaces
- Two Matrix Link ports for connection to D-Mitri DCM-2 and DCM-4 matrix mixing/routing modules
- Software Control: Full bidirectional communication with D-Mitri processors for control by CueStation software within a client-server architecture, as well as external control via Open Sound Control protocol
- Control Connections: The DCM-2 has two control ports for redundant control from a backup network or controller.
- Network:
- AC Power
- Connector: PowerCon®
- Operating Voltage Range: 100–240 V AC, 50-60 Hz
- Power Consumption: 150 W maximum
- PHYSICAL
- Dimensions:
- Two rack spaces
- 19" w x 3.5" h x 15.9" d
- (483 mm x 89 mm x 404 mm)
- Weight: 23 lbs.
- Dimensions:
- Notes
- System Requirements: D-Mitri requires a Gigabit Ethernet infrastructure
- Cabling: Cat-5e or Cat-6
