Meyer Sound LINA Very Compact Line Array Loudspeaker with 3-Pin XLR, Remote Monitoring System, and Fixed Rain Hood

More Meyer Sound products

Write a review Q&A SKU: LINA-WP-3XLR-FIXED-RMS PSSL ID#: 114620
1 of 2
Available options

Product attributes

  • Free shipping
You can get it quickly!

This isn't something we usually keep in stock, but we can typically get it very quickly from the vendor. Please place your order, and we'll let you know when to expect it.

Need help? Contact our product specialists.

View full details

Need help? Contact our product specialists.

Description

Meyer Sound LINA Very Compact Line Array Loudspeaker with 3-Pin XLR, Remote Monitoring System, and Fixed Rain Hood

The LINA™ compact linear line array loudspeaker excels in array performance while providing exceptional high frequency headroom, phase coherence, and consistent coverage. Its light weight and small size are ideal for venues that require a low-profile, high-power, curvilinear array system with exceptional fidelity, such as small theaters, theme parks, houses of worship, and AV systems. Single cabinet or short stack implementations of LINA are also well-suited for front-fill and under-balcony applications that must attain precise high-frequency vertical coverage. In addition to standalone implementations, LINA is useful in LEOPARD™ systems as a supplemental fill loudspeaker.

Features:

  • Small footprint and narrow width are ideal for small venues and fill applications
  • Amazing power-to-size ratio
  • Exceptional linearity and transient reproduction at any level, high peak power output, and extremely low distortion
  • Self-powered to simplify setup and increase reliability
  • Flexible rigging for flown and ground-stacked arrays
  • Easy integration with Meyer Sound’s LEOPARD line array loudspeaker, and the 750-LFC and 900-LFC low frequency control elements

Specifications:

  • Acoustical:
    • Operating Frequency Range: 65 Hz – 18 kHz
    • Phase Response: 100 Hz – 18 kHz ±45°
    • Maximum SPL: 138 dB
    • Linear Peak SPL: 132 dB with 19 dB crest factor (M-noise), 128 dB (Pink noise), 130 dB (B-noise)
  • Coverage:
    • Horizontal Coverage: 100°
    • Vertical Coverage: Varies, depending on array length and configuration
  • Transducers:
    • Low Frequency: Two 6.5-inch long-excursion cone drivers; 4 Ω nominal impedance
    • High Frequency: One 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM® manifold; 8 Ω nominal impedance
  • Audio Input:
    • Type: Differential, electronically balanced
    • Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
    • Connectors: XLR 3-pin female input with male loop output.
    • Input Impedance: 10 kΩ differential between pins 2 and 3
    • Wiring:
      • Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
      • Pin 2: Signal +
      • Pin 3: Signal -
      • Case: Earth ground and chassis
    • Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
    • Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
  • Amplifier:
    • Type: 3-channel, Class-D
    • Total Output Power: 1950 W peak
    • THD, IM, TIM: < 0.02%
    • Cooling: Convection
  • AC Power:
    • Connectors: powerCON 20 input with loop output
    • Automatic Voltage Selection: 90–265 V AC, 50–60 Hz
    • Safety Agency Rated Operating Range: 100–240 V AC, 50–60 Hz
    • Turn-on and Turn-off Points: Turn-on: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
  • Current Draw:
    • Idle Current: 0.25 A rms (115 V AC); 0.25 A rms (230 V AC); 0.29 A rms (100 V AC)
    • Maximum Long-Term Continuous Current (>10 sec): 2.3 A rms (115 V AC); 1.16 A rms (230 V AC); 2.8 A rms (100 V AC)
    • Burst Current (<1 sec): 3.9 A rms (115 V AC), 1.7 A rms (230 V AC), 4.5 A rms (100 V AC)
    • Maximum Instantaneous Peak Current: 8.8 A peak (115 V AC), 4.0 A peak (230 V AC), 9.2 A peak (100 V AC)
    • Inrush Current: < 20 A peak
  • RMS Network: Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
  • Physical:
    • Dimensions: W: 20.27 in (515 mm) x H: 8.38 in (213 mm) x D: 15.32 in (389 mm)
    • Weight: 43 lb (19.5 kg)
    • Enclosure: Premium multi-ply birch, slightly textured black finish
    • Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
    • Rigging: End frames with captive GuideALinks secured with 0.25 in x 0.53 in quick release pins that allow 0° to 11° splay angles. M6 attachment points for optional MYA-MINA/LINA mounting yoke and MUBMINA/LINA U-bracket

RIGID RAIN HOOD

The LINA rigid removable rain hood is easily attached and removed with the included four screws

Reviews

Write a review

Score

Questions & Answers

Ask a question

You may also like

  • Ask the experts

    Our expert team guides customers towards the best equipment solutions, ensuring unparalleled performance and customer satisfaction.

    Ask an expert here 
  • Financing Options

    We offer flexible financing options, starting at 0% APR. Our financing plans provide customers with the opportunity to acquire top-quality audio, DJ, and lighting equipment with ease and convenience.

    Explore more financing options 
  • Rewards Program

    Join our Rewards Program today and enjoy the benefits of smart shopping!

    Visit our rewards page