Meyer Sound MSL4 Long-Throw Powered Speaker w/ Cover & Dolly

Meyer Sound MSL4 Long-Throw Loudspeaker w/ Cover & Dolly

The MSL-4 is an arrayable, high-Q long-throw reinforcement loudspeaker. It operates with a very flat frequency response all the way from 18kHz down to an impressive 65Hz. To get an even lower range, the unit works well with mid-bass loudspeakers and subwoofers. The MSL-4 is unique; it is the first high-power, highperformance, self-contained reinforcement speaker. By integrating the controllers, amplifiers, and speaker components into one unit, sound designers are no longer required to waste time fussing with different amplifier gains, rack wiring, loudspeaker protection, or other problems that can compromise a system’s performance. All that is required is to hookup AC power and run a good quality signal source into it. What could be simpler? The MSL-4 literally does all the work. The power system utilizes the Intelligent AC system, which provides for automatic voltage selection, EMI filtering, soft current turnon, surge suppression, and dual circuit breakers. The MSL-4 is highly arrayable, with a very precise coverage pattern: 40° horizontal by 35° vertical. The unit can be tight-packed to get high power over long distances, or splayed to increase the horizontal coverage.

Features:

• Integrated control electronics and amplifiers
• TruPower™ Limiting (TPL)
• Intelligent AC™ System
• Compatible with the Remote Monitoring System™ (RMS)
• Long-throw
• High-Q
• Ultra-low distortion

Specifications:

• Acoustical
  • Frequency Response: ±4dB 65Hz-18kHz:-6dB at 60Hz and 20kHz
  • Phase Response: ±30° 450Hz-10kHz
  • Maximum Peak SPL: 140dB
  • Dynamic Range: > 110dB
  • Coverage: 40° H x 35° V
• Transducers
  • Low Frequency: 12” diameter MS-12 cone (3” voice coil
  • High Frequency: 2” throat, 4” diaphragm MS-2001A compression driver
  • Acoustic Crossover Point: 800Hz
• Audio Input
  • Type: Complementary power MOSFET output stages class AB/H
  • Burst Capability: 1240 Watts (620 Watts/channel)
  • THD, IM, TIM: < .02 %
• AC Power
  • Type: 10 kΩ impedance, electronically balanced
  • Connector: XLR (A-3) male and female
  • Nominal Input Level: +4 dBu (1.23 Vrms)
• Amplifiers
  • Connector: 250V NEMA L6-20P / IEC 309 Twistlock male receptac
  • Automatic voltage selection: 85 – 134 V / 165 – 264 V; 50 Hz / 60 Hz
  • Max Continuous RMS Current (> 10 s):
    • 115 V: 8 A
    • 230 V: 4 A
    • 100 V: 10 A
  • Max Burst RMS Current (< 1 s):
    • 115 V: 15 A
    • 230 V: 8 A
    • 100 V: 18 A
  • Max Peak Current During Burst:
    • 115 V: 22 Apk
    • 230 V: 11 Apk
    • 100 V: 25 Apk
  • Soft Current Turn-on: Inrush current < 12 A @115 V
• Physical
  • Dimensions: 21.25” W x 36” H x 30” D
  • Weight:
    • w/o L-Track: 184 lb (83.5 kg); shipping: 213 lb (96.6 kg)
    • with L-Track: 205 lb (93.2 kg); shipping 226 lb(106.3 kg)
  • Enclosure/Finish: Multi-ply hardwood/black textured
  • Protective Grill: Hex perforated steel grill, foam covering
  • Rigging:
    • Six aircraft pan fittings (thrree on top and bottom). Working load for each fitting is 600 lb (273kg.) based on a 5:1 safety factor with a straight tensile pull.
    • Optional L-Track rigging system: Working load for each end of the cabinet is 1500 lbs (681.8 kg), based on a 5:1 safety factor. Working load for individual points varies; see the chart on page 9.