Meyer Sound UPJ-1P Mid-Sized Point-Source Loudspeaker with 80 Degree Rotatable Horn, Remote Monitoring System, and 5-Pin XLR
The UPJ-1P combines the advantages of self-powered systems with the placement and arraying flexibility afforded by a VariO™ rotatable horn. Though remarkably compact and lightweight, the UPJ-1P produces a robust linear peak SPL output of 125 dB with 18 dB crest factor, making it suitable for use either singly as a primary loudspeaker or in multi-cabinet horizontal or vertical clusters. Applications include audio-visual presentations, small- to medium-sized main sound reinforcement systems, fill, delay, effects, under-balcony or under-canopy coverage and distributed systems.
Features:
- Exceptional fidelity and extended high frequency enhance performance
- Compact package delivers surprising power capability
- Extraordinarily flat amplitude and phase response provide tonal accuracy and precise imaging
- Constant-Q horn affords uniform response throughout the coverage area
- Predictable array performance ensures system design flexibility
- VariO horn enables versatile coverage options, whether orienting loudspeakers horizontally or vertically
Specifications:
- Acoustical:
- Operating Frequency Range: 55 Hz - 20 kHz
- Frequency Response: 66 Hz - 18 kHz ±4 dB
- Phase Response: 750 Hz - 18 kHz ±45°
- Linear Peak SPL: 125 dB with 18 dB crest factor (M-noise), 122.5 dB (Pink noise), 125 dB (B-noise)
- Coverage: 80° x 50° (rotatable horn)
- Default Horn Alignment: 80°
- Transducers:
- Low Frequency: One 10-inch cone driver with neodymium magnet; 4 Ω nominal impedance
- High Frequency: One 3-inch diaphragm compression driver; 16 Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: 5-pin XLR connectors accommodate both balanced audio and RMS signals
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal - (optional polarity reversal switch)
- Pin 4: RMS (polarity insensitive)
- Pin 5: RMS (polarity insensitive)
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Amplifier:
- Type: Two-channel complementary MOSFET output stages (class AB/bridged)
- Total Output Power: 550 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Forced air cooling over amplifier heat sink
- AC Power:
- Connectors: powerCON 20 input with loop output
- Automatic Voltage Selection: 90–264 V AC
- Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
- Turn-on and Turn-off Points: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
- Current Draw:
- Idle Current: 0.41 A rms (115 V AC); 0.33 A rms (230 V AC); 0.42 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 3.2 A rms (115 V AC); 1.6 A rms (230 V AC); 3.7 A rms (100 V AC)
- Burst Current (<1 sec): 5 A rms (115 V AC); 2.5 A rms (230 V AC); 5.8 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 17 A pk (115 V AC); 8.5 A pk (230 V AC); 20 A pk (100 V AC)
- Inrush Current: 15 A pk (115 V AC); 13 A pk (230 V AC); 15 A pk (100 V AC)
- RMS Network (Optional): Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
- Physical:
- Dimensions: W: 11.15 in (283 mm) x H: 22.47 in (571 mm) x D: 12.23 in (311 mm)
- Weight: 46 lb (20.87 kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with black mesh
- Rigging: Aluminum end plates for mounting/flying cabinets with QuickFly and standard rigging options; metric M8 threaded points are used in all UPJ-1P rigging hardware
