QSC CMX2000Va 1100 Watt Contractor Power Amplifi Alternatives

QSC CMX2000Va 1100 Watt Contractor Power Amplifi

More QSC products

Write a review Q&A SKU: CMX2000VA Solotech ID#: 71233
1 of 1
Unfortunately the QSC CMX2000Va 1100 Watt Contractor Power Amplifi is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

View full details
Unfortunately the QSC CMX2000Va 1100 Watt Contractor Power Amplifi is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

Description

QSC CMX2000Va 1100 Watt Contractor Power Amplifier

Features:

  • "Flex-Use" loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems
  • "Flex-Use" input connectivity choices including actively balanced barrier strip, XLR, or 1/4" TRS
  • "Flex-Use" output connectivity choices include NL4 Speakon and detachable terminal block
  • Rack mountable with chassis less than 16" (40.6 mm) deep
  • 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings
  • Tamper-proof security cover for gain controls
  • Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection
  • Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

Specifications:

  • Stereo Mode (both channels driven)
    • 8ohms FTC 0.1% THD: 1050 W
    • 8ohms EIA 0.1% THD: 1100 W
    • 4ohms FTC 0.1% THD: 1600 W
    • 4ohms EIA 0.5% THD: 2000 W*
    • 2ohms EIA 1% THD: 2500 W
    • 70V Direct EIA 1% THD: 2500 W
    • 100V Direct EIA 1% THD: 1000 W
    • FTC: 20 Hzñ20 kHz after preconditioning
    • EIA: 1 kHz
  • Bridge Mono Mode:
    • 8ohms FTC, 0.1% THD - 3200 W
    • 8ohms EIA, 0.1% THD - 3600 W
    • 4ohms EIA, 1% THD - 5000W
    • 70V Direct Drive EIA, 1% THD - 5000 W
    • 100V Direct Drive EIA, 1% THD - 3600 W
    • FTC: 20 Hzñ20 kHz after preconditioning; both channels driven simultaneously
    • EIA: 1 kHz
  • Signal to Noise (20 Hzñ20 kHz, 8ohms): > 100 dB
  • Input Sensitivity into 8ohms: 1.42 V (+5.3 dBu)
  • Max Voltage Gain: 64? (36 dB)
  • Output Circuitry: 3-tier Class H
  • Current Draw (pink noise program)
  • Typical, 1/8 power 4ohms, 120 V: 13.9 A
  • Typical, 1/8 power 4ohms, 230 V: 7 A
  • Severe, 1/3 power 4ohms, 120 V: 26.9 A
  • Severe, 1/3 power 4ohms, 230 V: 13.5 A
  • Distortion (SMPTE-IM): < 0.01%
  • Distortion (typical)
  • 20 Hzñ20 kHz: 10 dB below rated power: < 0.03% THD / 4ohms and 8ohms
  • 1.0 kHz and below: full rated power: < 0.03% THD / 4ohms and 8ohms
  • Frequency Response: 20 Hzñ20 kHz: ±1 dB; -3 dB points: 5 Hz and 50 kHz
  • Damping Factor (1 kHz and below): >300 at 8ohms
  • Input Impedance: 10 kohms unbalanced, 20 kohms balanced
  • Input Clipping: 10 V rms (+22 dBu)
  • Cooling: Continuously variable-speed fan, rear-to-front air flow
  • Connectors (each channel):
    • Input: Active balanced; barrier strip, XLR and 1/4 (6.3 mm) ñ TRS tip and XLR pin 2 positive
    • Output: Detachable terminal block and Neutrik Speakon
  • Controls:
    • Front: AC switch, Channels 1 & 2 gain knobs
    • Rear: 10-position DIP switch
  • Indicators: Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED (1 per channel)
  • Amplifier Protection: Stable into reactive or mismatched loads
  • Load Protection: On/off muting, AC coupling (CMX 300Va and CMX 500Va), triac crowbar (CMX 800Va and CMX 2000Va on each channel)
  • Power Requirements: 120 or 230 VAC, 50 ñ 60 Hz
  • Dimensions (HWD)
    • 2 RU models: 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears
    • 3 RU model (CMX 2000Va): 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears
  • Weight - Net: 75 lb (33.1 kg)
  • Weight - Shipping: 87 lb (37.2 kg)

Reviews

Write a review

Score

Questions & Answers

Ask a question

You may also like

  • Ask the experts

    Our expert team guides customers towards the best equipment solutions, ensuring unparalleled performance and customer satisfaction.

    Ask an expert here 
  • Financing Options

    We offer flexible financing options, starting at 0% APR. Our financing plans provide customers with the opportunity to acquire top-quality audio, DJ, and lighting equipment with ease and convenience.

    Explore more financing options 
  • Rewards Program

    Join our Rewards Program today and enjoy the benefits of smart shopping!

    Visit our rewards page