The MADI Converter converts MADI digital audio streams from optical format to coaxial and from coaxial to optical. The compact 19" housing with 1 unit height contains six fully independent bi-directional converters. The MADI converter is an ideal companion to RMEs MADI Bridge. Its six coaxial inputs and outputs can be converted to optical, which is advantageous in live and installed setups, and for longer cable lengths. The device can be placed underneath the RME MADI Bridge ideally; the coaxial in- and outputs of the two devices will be right next to each other vertically, and can be connected with short patch cables easily.
Six, bi-directional MADI optical to BNC / BNC to optical converters, housed in a single space rack-mount
All twelve inputs are equipped with status LEDs on the front panel
Input signal pass through unaltered
Supports any format, 56 or 64 channels, at any sample rates
Not affected by embedded invisible control commands, out-of-spec data rates, or violations of the MADI
Through the use of equalizing and highly sensitive input stages, coaxial cable lengths of 100 meters can be
Includes a 1 input, 3 output MIDI distributor
Internal switching power supply allows operation with voltages ranging from 100 to 240 AC Volts
Short-circuit-proof, has an integrated line-filter, is fully regulated against voltage fluctuations and
suppresses mains interference
Input MADI: 6 x BNC, 6 x optical
Output MADI: 6 x BNC, 6 x optical
MIDI input: 1 x 5-pin DIN
MIDI output: 3 x 5-pin DIN
Sync: not required
Sample rates: any
Power supply: internal switching mode ps, 100 V-240 V AC, 50-60 Hz, 15 Watts
Dimensions: 483 x 44 x 200 mm
Selecting either "Yes" or "No" for each "Was this review helpful?" form within each review will automatically submit your choice.
Questions & Answers
Selecting either "Yes" or "No" for each "Was this answer helpful?" form within each answer will automatically submit your choice.