Turbosound iQ15 15-Inch 2-Way Powered Speaker
The 2,500-Watt iQ15 is a powered 2-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 15" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel Klark Teknik Class-D power amplifier, the iQ15 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ15’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
Features:
- 2 way full range loudspeaker for portable PA and installation applications
- 2,500 Watt power featuring Klark Teknik Class-D technology
- Klark Teknik Digital Signal Processing for total system control
- Speaker modelling includes accurate models of industry standard speakers
- SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
- Ultranet digital audio networking connects to mixers and other sources
- 15" low frequency driver with low mass voice coil for improved transient response
- High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound's webpage
- Lightweight fiber glass reinforced composite enclosure
- Rugged powder coated perforated steel mesh grille
- Dual angle pole mount for accurate audience coverage
- Multiple internal rigging points for installation applications
- Mains input and link output on Neutrik powerCON connectors
- Designed and engineered in the U.K.
Specifications:System
- Frequency response:50 Hz – 18 kHz ±3 Db / 42 Hz – 20 kHz -10 dB
- Nominal dispersion:75° H x 55° V @ -6 dB points
- Maximum SPL: 132 dB peak
- Crossover type:Active
- Transducers: 1 x 15" (387 mm) LF driver / 1 x 1" (25.4 mm) HF compression driver
- Limiter: Independent HF, LF, peak and rms
Amplifier
- Maximum output power: 2,500 W
- Type: Class-D
- Protection: Short circuit, open circuit, thermal
Connectors
- Input A / B: 2 x combo jack/XLR
- Sensitivity: Line +4 dBu, mic -22 dBu, switchable
- Input impedance: 20 kO unbalanced, 40 kO balanced
- Maximum input level: +21 dBu
- Output A / B: 2 x XLR linked to input
- Mix output:XLR, balanced
- Output impedance: 100 O unbalanced, 200 O balanced
- Ultranet input/link: 2 x RJ45
- Mains supply: Neutrik powerCON input 20A and link 15A
Controls
- DSP: 2 x gain controls (channels A and B) / 2 x Line/Mic switch
- Mixer section: 2 x gain controls (channels A and B) / 2 x Line/Mic switch
User DSP Functions
- Factory EQ presets:Positioning, Sound mode, Sound modeling, FBQ
- Display: LCD 128 x 32, blue backlit
- Delay: 0 - 300 ms
- Equalisation: High and low shelving EQ / 2 x parametric EQ
- Limiter: Zero attack input limiter
- Presets: 20 total presets, 19 user-definable
- Crossover:High Pass L-R 24 dB/oct
- Protection:Lock-out function for all settings
Ultranet Digital Network
- System: (Signal) 16 channels / (Latency) < 0.9 ms
- Cabling: Shielded CAT5
- Cable length: Max. 246 ft / 75 m recommended
Power Supply
- Power consumption: 150 W @ 1/8 max power
- Voltage (fuses): USA / Canada 120 V~, 60 Hz (T 15 A H 250 V)
Enclosure
- Dimensions: 27.9" x 17.7" x 15.0" (HxWxD)
- Net weight: 57 Lbs./26.1 kg
- Construction: injection-moulded polypropylene enclosure
- Finish: black painted
- Grille: powder coated perforated steel
- Flying hardware: M10 x 3 points
