







Accessories

Arrayable 2 Way 12" Full Range Loudspeaker for Installation Applications, 100° H x 100° V Dispersion
Prague TPA122/00
The 2 way full range TPA122/00 is a switchable passive/bi-amp 12" 2,000 Watt arrayable loudspeaker system that is ideally suited for a wide range of speech and music sound reinforcement applications. The TPA122/00 is designed to work in conjunction with Turbosound loudspeaker management systems, providing optimal FOH performance, as well as offering considerable flexibility to readily adapt to varying venue requirements.
The TPA122/00 arrayable loudspeaker features a carbon fibre loaded 12" low frequency driver with inside/outside wound coil with low mass voice coil for improved transient response, and an aluminium dome 1" neodymium motor compression driver mounted on a 100° horizontal by 100° vertical waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch.
Finished in a highly durable semi matt white paint, the cabinet is constructed from 15 mm (5?*") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Internal M10 threaded rigging points are provided for suspension in any orientation, or mounting with dedicated brackets – available separately. The rear panel connector plate carries Neutrik speakOn* NL4 and barrier strip connectors for input and link connections to additional enclosures.
Architecture & Engineering Specifications
The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 12" (316 mm) LF driver and one 1" (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be fl at within ±3 dB from 45 Hz to 18 kHz and within -10 dB from 40 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 100° H x 100° V. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 40 Watts continuous, 160 Watts peak, LF: 500 Watts continuous, 2,000 Watts peak; passive: 500 Watts continuous, 2,000 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 97 dB, 1 Watt @ 1 metre. Maximum SPL (peak) measured at 1 metre with music program at stated amplifier input shall be HF: 128 dB, LF: 130 dB; passive: 130 dB. Dimensions: 711 mm high x 368 mm wide x 458 mm deep (28.0" x 14.5" x 18.0"). Net weight: 23.2 kg (51.1 lbs). The loudspeaker system shall be the Turbosound TPA122/00. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
Your products are guaranteed to be free from defects and carry a full warranty as described by the manufacturer. In the event of receiving defective or damaged products you should contact the manufacturer to coordinate a repair or replacement. All Sales are final. In the event that a product needs to returned to PSSL, you must contact us in advance for a Return Authorization number at 800-268-5520 or help@pssl.com. Products received without a Return Authorization number will be refused.
*Return And Exchange Exceptions: No returns or exchanges on computers, Apple products, CD or DVD duplicators, clothing, lamps, bulbs, opened effects juice, gels, videos, cartridges, styluses, carpet, LPs, CDs, bulk-cable, blank cassettes and CDs, slipmats, software, microphones, headphones, mouth pieces or any other expendable supplies. No refunds: On bubble, haze or fog machines or lighting equipment. They may be exchanged for same or greater value of the same type of item. THERE IS NO CREDIT FOR SHIPPING AND HANDLING FEES. All approved returns must be in new condition with all original boxes, accessories and packaging, or they will be subject to a minimum 25% restocking fee. Any returns unclaimed for over 30 days will be discarded. Gear that has been rack mounted, damaged gear due to misuse and any product that looks used and cannot be re-sold as new, will automatically be evaluated for a minimum 25% restocking fee. All returns will be processed within 72 hours of receipt.