Yorkville NX750P 15In Powered 2 Way LoudspeakerThe NX750P is the culmination of all of Yorkville’s research and development of molded technology to this point in time. The injection molded loudspeaker enclosure is loaded with a high performance 15-inch neodymium woofer and an 80º x 50º rotatable custom Waveguide horn.
It delivers 750 watts and uses the same combination of amplifier technologies that have already been proven in Yorkville active loudspeakers. The horn amplifier uses a two-tier class H linear technology, allowing the horn to produce loud clean transients to keep up with the high output of the woofer. The two-tier amplifier technology is a lower weight, more efficient amplifier with higher headroom and lower operating temperature. It is a perfect solution for powering the top end.
A newly designed switching amplifier drives the bottom end or woofer in the NX750P. The woofer or low frequency amplifier uses Class D switching technology to reduce overall weight of the amplifier section. This technology is similar to the power supply found in the Yorkville A4.4 power amplifier, the EF500Pactive enclosure and MicroMix M8 powered mixer.
Like the NX55P, careful consideration was taken in the design process to ensure the NX750P can easily be used in any orientation, close to walls, floors, and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production. The NX750P has a versatile direct input system and built-in mixer. The mixer allows the loudspeaker to be used directly with a microphone and / or line source. The loop output allows additional active cabinets to be driven from one cabinet’s mixer stage, or a series of cabinets to be driven from one source. If desired, multiple NX750P’s can be combined using the mixer inputs on each cabinet and coupling the loop outputs. This way you would have the ideal presentation system with two microphone inputs and two line inputs without any additional mixer. The microphone input has equalization and high pass filtering appropriate for vocal applications. The trim control allows looped cabinets to be individually adjusted in level. The NX750P has user defeatable 100Hz high pass filters to allow the cabinet to be used more efficiently with any Yorkville active subwoofer.
Features: - Integrated 750 Watt Amplifier
- Bi-amplified Power Module
- 15-inch Neodymium Woofer
- 1-inch Compression Driver
- 1.5-inch Polyester Horn Driver (1-inch Exit)
- Designed as Front-of-house or Monitor Loudspeaker
- 80° x 50° Custom Waveguide Horn
- Rugged Lightweight Molded Composite Cabinet Construction
- XLR ,1/4-inch Microphone & Line Inputs
- All-Metal Grille, Integrated Flypoints, Handles & Stand Mount
- 126 dB Maximum SPL
Specifications: - System Type: 2-Way
- Active or Passive: Active
- Program Power (Watts): 650 + 100
- Biampable: Self Powered
- Biamp Operation Only: Yes
- Max SPL (dB): 127
- Frequency Response (Hz +/- 3db): 50 - 26k
- Crossover Frequency (Hz): 1400
- Driver Configuration: 15 inch / 1.5 inch
- HF Driver(s): 1 inch Throat, Ceramic Magnet, 1.5 inch Polyester voicecoil
- HF Program Power (Watts): 100
- HF Dispersion (°H x °V): 80 x 50 rotatable
- LF Driver(s): 15 inch Neodymium Magnet 3 inch voicecoil
- LF Program Power(Watts): 650
- Total Power (Watts): 750
- HF Amplifier Type: Two Tier Class H
- LF Amplifier Type: Class D
- Power Cable: Yes
- Power Switch: Yes
- Inputs: 7
- Inputs - 1/4" Jacks 2 (line input) 2 (link in/out)
- Inputs - XLR 1 (mic) 2 (line in/out)
- Input Sensitivity (Vrms Sine): +4dBv / 1.23V
- Mixer Controls: Mixer on/off switch
- Mic Gain
- Line/CD Gain
- Treble/Bass Tweak
- Level Controls: +6dB/-infinity Main Volume
- EQ Controls: 100Hz HP Filter (LF Rolloff)
- Limiter: Yes
- LED Indicators: Power/Clip/Limit
- Other Controls / Features: Side recesses for ease of lifting
- Feet: Yes
- Flying Hardware: 1/4-20 x 5 - 2 (Top), 2 (Bottom), 1 (Pullback)
- Optional Flying Hardware: NX Flyware
- Bar Handles: 1 (Side)
- Pole Mount Adapter: (1 3/8"-3.5cm) Yes
- Enclosure Materials: Injection molded Polypropylene
- Grille: Perforated Metal
- Dimensions: (DWH xbackW, inches) 15 x 22 x 32 x 9.5
- Dimensions: (DWH xbackW, cm) 38 x 56 x 84 x 24
- Weight (lbs/kg): 62 / 28
