D&B Audiotechnik Z1120.002 MAX2 Active Stage Monitor with NLT4 F/M Connections

The 2-way passive MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands. The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill. The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.

Features:

• High feedback stability and sound pressure level
• Remarkable vocal presence and clarity
• Integrated pole mount for use in small PA applications
• Specific setup in d&b amplifiers ensures best performance and headroom
• Can also be driven by any appropriate linear amplifier

Specifications:

• System data:
  • Frequency response (-5 dB standard): 55 Hz - 20 kHz
  • Max. sound pressure:
    • with 10D: 131 dB
    • with D20/30D: 135 dB
    • with D40/D80/40D: 135 dB
  • Cabinets per amplifier channel: 2
• Loudspeaker data:
  • Configuration: 2-way stage monitor
  • Nominal impedance: 8 Ω
  • Power handling capacity (RMS/peak 10 ms): 250/1600 W
  • Nominal dispersion angle (h x v): 75°
  • Components:
    • 15" driver with ferrite magnet
    • coaxial 1.4" exit compression driver
    • passive crossover network
  • Connections: 2 x NLT4 F/M
• Dimensions / weight:
  • Dimensions (H x W x D): 354 x 580 x 496 mm (14 x 22.8 x 19.5"3)
  • Weight: 23 kg (50 lb)