






Art's 351 Single Channel 31 band 1/3 octave graphic equalizer features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connect-ions, adjustable high pass filter, adjustable low pass filter, variable input level control, clip level indicators, ground lift switch, internal power supply and selectable line voltage switch. A range control switch is provided which allows you to set the maximum boost or cut for each band of equalization to either 6dB or 12dB. The high pass filter rolls off lower frequencies which is useful for decreasing rumble or low frequency hum from a signal . Its range is adjustable from 10Hz to 250Hz. Frequencies below this setting are rolled off, while frequencies above are unaffected. The low pass filter rolls off higher frequencies which is useful for reducing hiss or sibilance from a signal. Its range is adjustable from 3kHz to 40kHz. The rugged, all-steel constructed chassis occupies 1U rack space and is intended for installation in standard 19" equipment racks.
Multiple input and output configurations are provided for ease of use and incorporate paralleled connections. The XLR and 1/4" TRS connectors use active balanced, low noise circuitry. XLR connections are: Pin 1 = ground, Pin 2 = Hot (+), and Pin 3 = Cold (-). The 1/4" TRS connections are: Tip = Hot (+), Ring = Cold (-), and Sleeve = ground. Both the XLR and 1/4" connectors may be used in an unbalanced configuration. The RCA jacks are unbalanced. The 351 is designed to work with a variety of signal levels. The input level control covers a wide range and can easily accommodate -10 and +4 signal lev els. A clip LED will light when a signal level of 5dB before clipping occurs.
The 351 may be used in a variety of applications such as live sound, recording studios, instrument racks as well as any conventional fixed installation environment. Use the 351 equalizer wherever precise modification of the frequency contour of a sound is needed. The 351 graphic equalizer is a powerful tool for solving a number of audio problems and creating interesting sound textures. Patch the EQ between your mixing console and power amps to allow you to alter the overall mix to better match your environment. Use the 351 between your monitor mixer and monitor power amps to aid in the removal of feedback inducing frequencies. Patch into a channel insert to EQ one channel or track individually. Run your instrument directly into the equalizer to enhance its sound before reaching a power amplifier or instrument amplifier. Patch the 351 into the effects loop of an instrument amplifier or between a preamp and power amp to have precise control over the complete sound.
The 351 Single Channel 31 Band Eq has the features and performance you need for any of your audio applications requiring equalization.
Your products are guaranteed to be free from defects and carry a full warranty as described by the manufacturer. In the event of receiving defective or damaged products you should contact the manufacturer to coordinate a repair or replacement. All Sales are final. In the event that a product needs to returned to PSSL, you must contact us in advance for a Return Authorization number at 800-268-5520 or help@pssl.com. Products received without a Return Authorization number will be refused.
*Return And Exchange Exceptions: No returns or exchanges on computers, Apple products, CD or DVD duplicators, clothing, lamps, bulbs, opened effects juice, gels, videos, cartridges, styluses, carpet, LPs, CDs, bulk-cable, blank cassettes and CDs, slipmats, software, microphones, headphones, mouth pieces or any other expendable supplies. No refunds: On bubble, haze or fog machines or lighting equipment. They may be exchanged for same or greater value of the same type of item. THERE IS NO CREDIT FOR SHIPPING AND HANDLING FEES. All approved returns must be in new condition with all original boxes, accessories and packaging, or they will be subject to a minimum 25% restocking fee. Any returns unclaimed for over 30 days will be discarded. Gear that has been rack mounted, damaged gear due to misuse and any product that looks used and cannot be re-sold as new, will automatically be evaluated for a minimum 25% restocking fee. All returns will be processed within 72 hours of receipt.