Focusrite ISA-One Digital Mic Pre With I/O Card
Focusrite's most affordable ISA preamplifier now has a digital card as standard. The ISA One Digital is now perfect for getting the legendarily transparent Focusrite sound directly into your recording system. The state-of-the-art stereo A-D converter (the same card as used with the ISA430 MkII) provides AES/EBU, S/PDIF and SMUX-compliant ADAT outputs for the unit, with the preamp and DI signals streamed separately over the two channels of the digital connection. With studio-grade A-D conversion and jitter-elimination technology, and an impressive 119dB dynamic range, this direct digital link bypasses the analogue circuitry and converters in your existing audio interface, providing a high-end signal path straight into any music-recording software, including Pro Tools, Logic, Nuendo and Sonar.
ISA series transformer-based preamplifierEncased in a rugged and portable chassis, ISA One offers the classic Focusrite microphone preamplifier at its lowest cost to date.
Stereo 192kHz A-D converterCutting-edge conversion technology, incorporating Focusrite analogue circuitry to deliver the best A-D performance in its class (dynamic range of 119dB).
Flexible independent D.I. channelISA One is ideal for both engineers and demanding performers alike, featuring independent gain control, an output for routing to an amp, an independent XLR output on the rear and routing to the optional A-D converter.
Switchable impedanceChoose one of four carefully selected input impedances, including the original ISA110 setting, to suit any microphone.
Headphone output with volume controlISA One can feed either a sum of the two inputs to the headphones output, or an external stereo cue mix (such as a stereo mix feed from an interface) via two TRS Jack inputs on the rear of the unit.
Dedicated insert pointAllows you to place extra processing between the preamplifier or DI and the optional converter, such as an EQ or compressor.
Mic Input Response- Gain range = 0dB to 60dB in 10dB steps + 20 dB of variable gain
- Input Impedance, variable as follows:
- (Switched Impedance setting Equivalent Input Impedance at 1kHz)
- Low = 600 Ohms
- ISA110 = 1400 Ohms
- Med = 2400 Ohms
- High = 6800 Ohms
- EIN (equivalent input noise) = -126dB measured at 60dB of gain with 150 Ohm terminating impedance and 22Hz/22kHz band-pass filter
- Noise at main output with gain at unity (0dB) = -97dBu measured with a 22Hz/22kHz band-pass filter
- Signal to noise ratio relative to max headroom (9dBu) = 106dB
- THD at medium gain (30dB) = 0.0009% measured with a 1kHz -20dBu input signal and with a 22Hz/22kHz band-pass filter
- Frequency response at minimum gain (0dB) = -0.5dB down at 10Hz and -3dB down at 125kHz
- Frequency response at maximum gain (60dB) = -3dB down at 16Hz and -3dB down 118kHz
- CMRR=98dB (Channel 1, 1kHz, maximum gain with +24 dBu input)
- Crosstalk Channel to Channel: with 10dB@1kHz input to chA, chB output =104dBrA. With 10dB@10kHz input to chA, chB output = 84dBrA
- Gain range = -20dB to +10dB in 10dB steps + 20 dB of variable gain
- Input Impedance = 10k? from 10Hz to 200kHz
- Noise at main output with gain at unity (0dB) = -96dBu measured with a 22Hz/22kHz band-pass filter
- Signal to noise ratio relative to max headroom (24dBu)=120dB
- Signal to noise ratio relative to 0dBFS (+22dBu) = 118dB
- THD at unity gain (0dB) = 0.001% measured with a 0dBu input signal and with a 22Hz/22kHz band-pass filter
- Frequency Response at unity gain (0dB) = -0.3dB down at 10Hz and -3dB down at 200kHz
